schrodinger.application.jaguar.gui.basis_selector module

schrodinger.application.jaguar.gui.basis_selector.num_basis_functions(basis_name, struc, per_atom=None, atom_num=None)

Calculate the number of basis functions for the specified structure or atom.

Parameters
  • basis_name (str) – The basis name including stars and pluses

  • struc (schrodinger.structure.Structure) – The structure

  • per_atom (dict or NoneType) – An optional dictionary of {atom index: basis name} for per-atom basis sets

  • atom_num (int or NoneType) – The atom index in struc to calculate the number of basis functions for. If given, the number of basis functions will be calculated for a single atom. If not given, the number of basis functions will be calculated for the entire structure.

Returns

A tuple of:

  • The number of basis functions for struc (if atom_num is not given) or for atom atom_num (int)

  • Are pseudospectral grids available for the specified structure or atom (bool)

Return type

tuple

Note

Either per_atom or atom_num may be given (or neither), but not both.

schrodinger.application.jaguar.gui.basis_selector.generate_description(basis_name, struc, per_atom=None, atom_num=None)

Return a description of the specified basis set applied to the given structure or atom.

Parameters
  • basis_name (str) – The basis set name

  • struc (schrodinger.structure.Structure) – The structure

  • per_atom (dict or NoneType) – An optional dictionary of {atom index: basis name} for per-atom basis sets

  • atom_num (int or NoneType) – The atom index in struc to calculate the number of basis functions for. If given, the number of basis functions will be calculated for a single atom. If not given, the number of basis functions will be calculated for the entire structure. Also controls use of NO_PS_MSG vs NO_PS_MSG_ATOMIC.

Returns

A list of four sentences describing the basis set. If a sentence does not apply to the basis set/structure combination, that location in the list will be None.

Return type

list

schrodinger.application.jaguar.gui.basis_selector.combine_sentences(sentences)

Given a list of sentences, combine all non-None sentences.

Parameters

sentences (list) – A list of sentences, where each sentence is either a string ending in a punctuation mark or None

Returns

The combined sentences

Return type

str

schrodinger.application.jaguar.gui.basis_selector.get_basis_display_name(basis)

Return the display name for the specified basis.

Parameters

basis (str) – Basis set to get the display name for.

Returns

The display name for this basis

Return type

str

schrodinger.application.jaguar.gui.basis_selector.get_basis_set_list_items()
Returns

tuple of basis set list items

Return type

tuple(BasisSetListWidgetItem)

class schrodinger.application.jaguar.gui.basis_selector.BasisSelectorLineEdit(parent)

Bases: schrodinger.ui.qt.pop_up_widgets.LineEditWithPopUp

A line edit that can be used to select a basis set. A basis selector pop up will appear whenever this line edit has focus.

__init__(parent)
Parameters
  • parent (PyQt5.QtWidgets.QWidget) – The Qt parent widget

  • pop_up_class (type) – The class of the pop up widget. Should be a subclass of PopUp.

setBlankBasisAllowed(allowed)

Specify whether a blank basis set is allowed or should result in an “Invalid basis set” warning and a red outline around the line edit.

Parameters

allowed (bool) – True if a blank basis set should be allowed. False if a blank basis set should result in a warning.

textUpdated(text)

Whenever the text in the line edit is changed, update the pop up and the red error outline

Parameters

text (str) – The current text in the line edit

popUpUpdated(basis_name)

Whenever the basis selected in the pop up is changed, update the line edit.

Parameters

basis_name (str) – The basis selected in the pop up

setStructure(struc)

Set the structure to use for determining basis set information and availability

Parameters

struc (schrodinger.structure.Structure) – The structure to use

setStructureAndUpdateBorder(struct)

Set the structure and update the edit border to show whether the current basis set is valid for the structure or not

Parameters

struct (schrodinger.structure.Structure) – The structure to use

setAtomNum(atom_num)

Set the atom number. The basis selector will now allow the user to select a basis set for the specified atom rather than for the entire structure. Note that this function will clear any per-atom basis sets that have been set via setPerAtom.

Parameters

atom_num (int) – The atom index

setPerAtom(per_atom)

Set the atom number. The basis selector will now allow the user to select a basis set for the specified atom rather than for the entire structure. Note that this function will clear any per-atom basis sets that have been set via setPerAtom.

Parameters

atom_num (int) – The atom index

setBasis(basis)

Set the basis to the requested value.

Parameters

basis_full (str or NoneType) – The requested basis. Note that this name may include *’s and +’s.

Raises

ValueError – If the requested basis was not valid. In these cases, the basis set will not be changed.

hasAcceptableInput()

Return True if a basis set has been specified. False otherwise.

isValid()

Return True if a basis set has been specified and the basis set applies to the current structure. False otherwise.

ALIGN_AUTO = 4
ALIGN_BOTTOM = 1
ALIGN_LEFT = 3
ALIGN_RIGHT = 2
ALIGN_TOP = 0
class ActionPosition(value)

Bases: enum.Enum

An enumeration.

LeadingPosition = 0
TrailingPosition = 1
DrawChildren = 2
DrawWindowBackground = 1
class EchoMode(value)

Bases: enum.Enum

An enumeration.

Normal = 0
NoEcho = 1
Password = 2
PasswordEchoOnEdit = 3
IgnoreMask = 4
LeadingPosition = 0
NoEcho = 1
Normal = 0
class PaintDeviceMetric(value)

Bases: enum.Enum

An enumeration.

PdmWidth = 1
PdmHeight = 2
PdmWidthMM = 3
PdmHeightMM = 4
PdmNumColors = 5
PdmDepth = 6
PdmDpiX = 7
PdmDpiY = 8
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
Password = 2
PasswordEchoOnEdit = 3
PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag(value)

Bases: enum.Flag

An enumeration.

DrawWindowBackground = 1
DrawChildren = 2
IgnoreMask = 4
TrailingPosition = 1
acceptDrops(self) bool
accessibleDescription(self) str
accessibleName(self) str
actionEvent(self, a0: QActionEvent)
actions(self) List[QAction]
activateWindow(self)
addAction(self, a0: QAction)
addAction(self, action: QAction, position: QLineEdit.ActionPosition) None
addAction(self, icon: QIcon, position: QLineEdit.ActionPosition) QAction
addActions(self, actions: Iterable[QAction])
adjustSize(self)
alignment(self) Qt.AlignmentFlag
autoFillBackground(self) bool
backgroundRole(self) QPalette.ColorRole
backspace(self)
baseSize(self) QSize
blockSignals(self, b: bool) bool
changeEvent(self, a0: QEvent)
childAt(self, p: QPoint) QWidget
childAt(self, ax: int, ay: int) QWidget
childEvent(self, a0: QChildEvent)
children(self) List[QObject]
childrenRect(self) QRect
childrenRegion(self) QRegion
clear(self)
clearFocus(self)
clearMask(self)
close(self) bool
closeEvent(self, a0: QCloseEvent)
colorCount(self) int
completer(self) QCompleter
connectNotify(self, signal: QMetaMethod)
contentsMargins(self) QMargins
contentsRect(self) QRect
contextMenuEvent(self, a0: QContextMenuEvent)
contextMenuPolicy(self) Qt.ContextMenuPolicy
copy(self)
create(self, window: PyQt6.sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createStandardContextMenu(self) QMenu
createWindowContainer(window: QWindow, parent: typing.Optional[QWidget] = None, flags: Qt.WindowType = Qt.WindowFlags()) QWidget
cursor(self) QCursor
cursorBackward(self, mark: bool, steps: int = 1)
cursorForward(self, mark: bool, steps: int = 1)
cursorMoveStyle(self) Qt.CursorMoveStyle
cursorPosition(self) int
cursorPositionAt(self, pos: QPoint) int
cursorPositionChanged

cursorPositionChanged(self, a0: int, a1: int) [signal]

cursorRect(self) QRect
cursorWordBackward(self, mark: bool)
cursorWordForward(self, mark: bool)
customContextMenuRequested

customContextMenuRequested(self, pos: QPoint) [signal]

customEvent(self, a0: QEvent)
cut(self)
del_(self)
deleteLater(self)
depth(self) int
deselect(self)
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

devType(self) int
devicePixelRatio(self) float
devicePixelRatioF(self) float
devicePixelRatioFScale() float
disconnect(a0: QMetaObject.Connection) bool
disconnect(self) None
disconnectNotify(self, signal: QMetaMethod)
displayText(self) str
dragEnabled(self) bool
dragEnterEvent(self, a0: QDragEnterEvent)
dragLeaveEvent(self, e: QDragLeaveEvent)
dragMoveEvent(self, e: QDragMoveEvent)
dropEvent(self, a0: QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) List[QByteArray]
echoMode(self) QLineEdit.EchoMode
editingFinished

editingFinished(self) [signal]

effectiveWinId(self) PyQt6.sip.voidptr
end(self, mark: bool)
ensurePolished(self)
enterEvent(self, event: QEnterEvent)
event(self, a0: QEvent) bool
eventFilter(self, a0: QObject, a1: QEvent) bool
find(a0: PyQt6.sip.voidptr) QWidget
findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
focusInEvent(event)

When the line edit receives focus, show the pop up

focusNextChild(self) bool
focusNextPrevChild(self, next: bool) bool
focusOutEvent(self, a0: QFocusEvent)
focusPolicy(self) Qt.FocusPolicy
focusPreviousChild(self) bool
focusProxy(self) QWidget
focusWidget(self) QWidget
font(self) QFont
fontInfo(self) QFontInfo
fontMetrics(self) QFontMetrics
foregroundRole(self) QPalette.ColorRole
frameGeometry(self) QRect
frameSize(self) QSize
geometry(self) QRect
grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) QPixmap
grabGesture(self, type: Qt.GestureType, flags: Qt.GestureFlag = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)
grabMouse(self, a0: Union[QCursor, Qt.CursorShape]) None
grabShortcut(self, key: Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) int
graphicsEffect(self) QGraphicsEffect
graphicsProxyWidget(self) QGraphicsProxyWidget
hasFocus(self) bool
hasFrame(self) bool
hasHeightForWidth(self) bool
hasMouseTracking(self) bool
hasSelectedText(self) bool
hasTabletTracking(self) bool
height(self) int
heightForWidth(self, a0: int) int
heightMM(self) int
hide(self)
hideEvent(self, a0: QHideEvent)
home(self, mark: bool)
inherits(self, classname: str) bool
initPainter(self, painter: QPainter)
initStyleOption(self, option: QStyleOptionFrame)
inputMask(self) str
inputMethodEvent(self, a0: QInputMethodEvent)
inputMethodHints(self) Qt.InputMethodHint
inputMethodQuery(self, a0: Qt.InputMethodQuery) Any
inputMethodQuery(self, property: Qt.InputMethodQuery, argument: Any) Any
inputRejected

inputRejected(self) [signal]

insert(self, a0: str)
insertAction(self, before: QAction, action: QAction)
insertActions(self, before: QAction, actions: Iterable[QAction])
installEventFilter(self, a0: QObject)
isActiveWindow(self) bool
isAncestorOf(self, child: QWidget) bool
isClearButtonEnabled(self) bool
isEnabled(self) bool
isEnabledTo(self, a0: QWidget) bool
isFullScreen(self) bool
isHidden(self) bool
isLeftToRight(self) bool
isMaximized(self) bool
isMinimized(self) bool
isModal(self) bool
isModified(self) bool
isReadOnly(self) bool
isRedoAvailable(self) bool
isRightToLeft(self) bool
isSignalConnected(self, signal: QMetaMethod) bool
isUndoAvailable(self) bool
isVisible(self) bool
isVisibleTo(self, a0: QWidget) bool
isWidgetType(self) bool
isWindow(self) bool
isWindowModified(self) bool
isWindowType(self) bool
keyPressEvent(self, a0: QKeyEvent)
keyReleaseEvent(self, a0: QKeyEvent)
keyboardGrabber() QWidget
killTimer(self, id: int)
layout(self) QLayout
layoutDirection(self) Qt.LayoutDirection
leaveEvent(self, a0: QEvent)
locale(self) QLocale
logicalDpiX(self) int
logicalDpiY(self) int
lower(self)
mapFrom(self, a0: QWidget, a1: QPoint) QPoint
mapFrom(self, a0: QWidget, a1: QPointF) QPointF
mapFromGlobal(self, a0: QPoint) QPoint
mapFromGlobal(self, a0: QPointF) QPointF
mapFromParent(self, a0: QPoint) QPoint
mapFromParent(self, a0: QPointF) QPointF
mapTo(self, a0: QWidget, a1: QPoint) QPoint
mapTo(self, a0: QWidget, a1: QPointF) QPointF
mapToGlobal(self, a0: QPoint) QPoint
mapToGlobal(self, a0: QPointF) QPointF
mapToParent(self, a0: QPoint) QPoint
mapToParent(self, a0: QPointF) QPointF
mask(self) QRegion
maxLength(self) int
maximumHeight(self) int
maximumSize(self) QSize
maximumWidth(self) int
metaObject(self) QMetaObject
metric(self, a0: QPaintDevice.PaintDeviceMetric) int
minimumHeight(self) int
minimumSize(self) QSize
minimumSizeHint(self) QSize
minimumWidth(self) int
mouseDoubleClickEvent(self, a0: QMouseEvent)
mouseGrabber() QWidget
mouseMoveEvent(self, a0: QMouseEvent)
mousePressEvent(event)

If the user clicks on the line edit and it already has focus, show the pop up again (in case the user hid it with a key press)

mouseReleaseEvent(self, a0: QMouseEvent)
move(self, a0: QPoint)
move(self, ax: int, ay: int) None
moveEvent(event)

Update the pop up position and size when the widget is moved

moveToThread(self, thread: QThread)
nativeEvent(self, eventType: QByteArray, message: PyQt6.sip.voidptr) Tuple[bool, PyQt6.sip.voidptr]
nativeParentWidget(self) QWidget
nextInFocusChain(self) QWidget
normalGeometry(self) QRect
objectName(self) str
objectNameChanged

objectNameChanged(self, objectName: str) [signal]

overrideWindowFlags(self, type: Qt.WindowType)
overrideWindowState(self, state: Qt.WindowState)
paintEngine(self) QPaintEngine
paintEvent(self, a0: QPaintEvent)
paintingActive(self) bool
palette(self) QPalette
parent(self) QObject
parentWidget(self) QWidget
paste(self)
physicalDpiX(self) int
physicalDpiY(self) int
placeholderText(self) str
popUpClosing
pos(self) QPoint
previousInFocusChain(self) QWidget
property(self, name: str) Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, signal: PYQT_SIGNAL) int
rect(self) QRect
redo(self)
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, id: int)
removeAction(self, action: QAction)
removeEventFilter(self, a0: QObject)
render(self, target: QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))
render(self, painter: QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren)) None
repaint(self)
repaint(self, x: int, y: int, w: int, h: int) None
repaint(self, a0: QRect) None
repaint(self, a0: QRegion) None
resize(self, a0: QSize)
resize(self, w: int, h: int) None
resizeEvent(event)

Update the pop up position and size when the widget is resized

restoreGeometry(self, geometry: QByteArray) bool
returnPressed

returnPressed(self) [signal]

saveGeometry(self) QByteArray
screen(self) QScreen
scroll(self, dx: int, dy: int)
scroll(self, dx: int, dy: int, a2: QRect) None
selectAll(self)
selectedText(self) str
selectionChanged

selectionChanged(self) [signal]

selectionEnd(self) int
selectionLength(self) int
selectionStart(self) int
sender(self) QObject
senderSignalIndex(self) int
setAcceptDrops(self, on: bool)
setAccessibleDescription(self, description: str)
setAccessibleName(self, name: str)
setAlignment(self, flag: Qt.AlignmentFlag)
setAttribute(self, attribute: Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, enabled: bool)
setBackgroundRole(self, a0: QPalette.ColorRole)
setBaseSize(self, basew: int, baseh: int)
setBaseSize(self, s: QSize) None
setClearButtonEnabled(self, enable: bool)
setCompleter(self, completer: QCompleter)
setContentsMargins(self, left: int, top: int, right: int, bottom: int)
setContentsMargins(self, margins: QMargins) None
setContextMenuPolicy(self, policy: Qt.ContextMenuPolicy)
setCursor(self, a0: Union[QCursor, Qt.CursorShape])
setCursorMoveStyle(self, style: Qt.CursorMoveStyle)
setCursorPosition(self, a0: int)
setDisabled(self, a0: bool)
setDragEnabled(self, b: bool)
setEchoMode(self, a0: QLineEdit.EchoMode)
setEnabled(self, a0: bool)
setFixedHeight(self, h: int)
setFixedSize(self, a0: QSize)
setFixedSize(self, w: int, h: int) None
setFixedWidth(self, w: int)
setFocus(self)
setFocus(self, reason: Qt.FocusReason) None
setFocusPolicy(self, policy: Qt.FocusPolicy)
setFocusProxy(self, a0: QWidget)
setFont(self, a0: QFont)
setForegroundRole(self, a0: QPalette.ColorRole)
setFrame(self, a0: bool)
setGeometry(self, a0: QRect)
setGeometry(self, ax: int, ay: int, aw: int, ah: int) None
setGraphicsEffect(self, effect: QGraphicsEffect)
setHidden(self, hidden: bool)
setInputMask(self, inputMask: str)
setInputMethodHints(self, hints: Qt.InputMethodHint)
setLayout(self, a0: QLayout)
setLayoutDirection(self, direction: Qt.LayoutDirection)
setLocale(self, locale: QLocale)
setMask(self, a0: QBitmap)
setMask(self, a0: QRegion) None
setMaxLength(self, a0: int)
setMaximumHeight(self, maxh: int)
setMaximumSize(self, maxw: int, maxh: int)
setMaximumSize(self, s: QSize) None
setMaximumWidth(self, maxw: int)
setMinimumHeight(self, minh: int)
setMinimumSize(self, minw: int, minh: int)
setMinimumSize(self, s: QSize) None
setMinimumWidth(self, minw: int)
setModified(self, a0: bool)
setMouseTracking(self, enable: bool)
setObjectName(self, name: str)
setPalette(self, a0: QPalette)
setParent(self, parent: QWidget)
setParent(self, parent: QWidget, f: Qt.WindowType) None
setPlaceholderText(self, a0: str)
setPopUp(pop_up)

Set the pop up widget to the specified pop up widget instance.

setPopUpClass(pop_up_class)

If a pop up class was not specified via the constructor, use this method to set it after the fact. Useful for placing widgets into *.ui files.

setPopupHalign(popup_halign)

Specify whether the pop up should have its right edge aligned with the right edge of the widget (ALIGN_RIGHT), have its left edge aligned with the left edge of the widget (ALIGN_LEFT), or have it’s horizontal alignment determined automatically (ALIGN_AUTO). Note that this setting is moot if the widget is wider than the pop up’s size hint, as the pop up will be extended to the same width as the widget.

Parameters

popup_halign (int) – The desired horizontal alignment of the pop up. Must be one of ALIGN_RIGHT, ALIGN_LEFT, or ALIGN_AUTO.

setPopupValign(popup_valign)

Specify whether the pop up should appear above (ALIGN_TOP), below (ALIGN_BOTTOM) the widget, or have it’s vertical alignment determined automatically (ALIGN_AUTO).

Parameters

popup_valign (int) – The desired vertical alignment of the pop up. Must be either ALIGN_TOP, ALIGN_BOTTOM, or ALIGN_AUTO.

setProperty(self, name: str, value: Any) bool
setReadOnly(self, a0: bool)
setScreen(self, a0: QScreen)
setSelection(self, a0: int, a1: int)
setShortcutAutoRepeat(self, id: int, enabled: bool = True)
setShortcutEnabled(self, id: int, enabled: bool = True)
setSizeIncrement(self, w: int, h: int)
setSizeIncrement(self, s: QSize) None
setSizePolicy(self, a0: QSizePolicy)
setSizePolicy(self, hor: QSizePolicy.Policy, ver: QSizePolicy.Policy) None
setStatusTip(self, a0: str)
setStyle(self, a0: QStyle)
setStyleSheet(self, styleSheet: str)
setTabOrder(a0: QWidget, a1: QWidget)
setTabletTracking(self, enable: bool)
setText(self, a0: str)
setTextMargins(self, left: int, top: int, right: int, bottom: int)
setTextMargins(self, margins: QMargins) None
setToolTip(self, a0: str)
setToolTipDuration(self, msec: int)
setUpdatesEnabled(self, enable: bool)
setValidator(self, a0: QValidator)
setVisible(self, visible: bool)
setWhatsThis(self, a0: str)
setWindowFilePath(self, filePath: str)
setWindowFlag(self, a0: Qt.WindowType, on: bool = True)
setWindowFlags(self, type: Qt.WindowType)
setWindowIcon(self, icon: QIcon)
setWindowIconText(self, a0: str)
setWindowModality(self, windowModality: Qt.WindowModality)
setWindowModified(self, a0: bool)
setWindowOpacity(self, level: float)
setWindowRole(self, a0: str)
setWindowState(self, state: Qt.WindowState)
setWindowTitle(self, a0: str)
sharedPainter(self) QPainter
show(self)
showEvent(event)

Update the pop up position and size when the widget is shown

showFullScreen(self)
showMaximized(self)
showMinimized(self)
showNormal(self)
signalsBlocked(self) bool
size(self) QSize
sizeHint(self) QSize
sizeIncrement(self) QSize
sizePolicy(self) QSizePolicy
stackUnder(self, a0: QWidget)
startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) int
staticMetaObject = <PyQt6.QtCore.QMetaObject object>
statusTip(self) str
style(self) QStyle
styleSheet(self) str
tabletEvent(self, a0: QTabletEvent)
testAttribute(self, attribute: Qt.WidgetAttribute) bool
text(self) str
textChanged

textChanged(self, a0: str) [signal]

textEdited

textEdited(self, a0: str) [signal]

textMargins(self) QMargins
thread(self) QThread
timerEvent(self, a0: QTimerEvent)
toolTip(self) str
toolTipDuration(self) int
tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) str
underMouse(self) bool
undo(self)
ungrabGesture(self, type: Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)
update(self, a0: QRect) None
update(self, a0: QRegion) None
update(self, ax: int, ay: int, aw: int, ah: int) None
updateGeometry(self)
updateMicroFocus(self, query: Qt.InputMethodQuery = Qt.ImQueryAll)
updatesEnabled(self) bool
validator(self) QValidator
visibleRegion(self) QRegion
whatsThis(self) str
wheelEvent(self, a0: QWheelEvent)
width(self) int
widthMM(self) int
winId(self) PyQt6.sip.voidptr
window(self) QWidget
windowFilePath(self) str
windowFlags(self) Qt.WindowType
windowHandle(self) QWindow
windowIcon(self) QIcon
windowIconChanged

windowIconChanged(self, icon: QIcon) [signal]

windowIconText(self) str
windowIconTextChanged

windowIconTextChanged(self, iconText: str) [signal]

windowModality(self) Qt.WindowModality
windowOpacity(self) float
windowRole(self) str
windowState(self) Qt.WindowState
windowTitle(self) str
windowTitleChanged

windowTitleChanged(self, title: str) [signal]

windowType(self) Qt.WindowType
x(self) int
y(self) int
class schrodinger.application.jaguar.gui.basis_selector.UpperCaseValidator

Bases: PyQt6.QtGui.QValidator

A QValidator that converts all input to uppercase

validate(text, pos)

See PyQt documentation for argument and return value documentation

Acceptable = 2
Intermediate = 1
Invalid = 0
class State(value)

Bases: enum.Enum

An enumeration.

Invalid = 0
Intermediate = 1
Acceptable = 2
__init__(*args, **kwargs)
blockSignals(self, b: bool) bool
changed

changed(self) [signal]

childEvent(self, a0: QChildEvent)
children(self) List[QObject]
connectNotify(self, signal: QMetaMethod)
customEvent(self, a0: QEvent)
deleteLater(self)
destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) bool
disconnect(self) None
disconnectNotify(self, signal: QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) List[QByteArray]
event(self, a0: QEvent) bool
eventFilter(self, a0: QObject, a1: QEvent) bool
findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
fixup(self, a0: str) str
inherits(self, classname: str) bool
installEventFilter(self, a0: QObject)
isSignalConnected(self, signal: QMetaMethod) bool
isWidgetType(self) bool
isWindowType(self) bool
killTimer(self, id: int)
locale(self) QLocale
metaObject(self) QMetaObject
moveToThread(self, thread: QThread)
objectName(self) str
objectNameChanged

objectNameChanged(self, objectName: str) [signal]

parent(self) QObject
property(self, name: str) Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) int
removeEventFilter(self, a0: QObject)
sender(self) QObject
senderSignalIndex(self) int
setLocale(self, locale: QLocale)
setObjectName(self, name: str)
setParent(self, a0: QObject)
setProperty(self, name: str, value: Any) bool
signalsBlocked(self) bool
startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) int
staticMetaObject = <PyQt6.QtCore.QMetaObject object>
thread(self) QThread
timerEvent(self, a0: QTimerEvent)
tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) str
class schrodinger.application.jaguar.gui.basis_selector.BasisSelector(parent=None, input_selector=None)

Bases: schrodinger.application.jaguar.gui.basis_selector._BasisSelectorPopUp

A widget for selecting a Jaguar basis set without a line edit.

BasisSelectorLineEdit should be favored over this class for new panels. This widget may be directly connected to a schrodinger.ui.qt.input_selector.InputSelector instance by passing it to the initializer or to setInputSelector. Alternatively, this widget may be used without an input selector by passing new structures to structureChanged.

ENABLE_WHEN_NO_STRUC = False
__init__(parent=None, input_selector=None)
setInputSelector(input_selector)

Set the input selector that this widget should respond to

Parameters

input_selector (schrodinger.ui.qt.input_selector.InputSelector) – The AppFramework input selector frame

structureChanged(new_struc)

React to the user changing the selected structure by updating or disabling the basis selection.

Parameters

new_struc (schrodinger.structure.Structure) – The new structure

Box = 1
DrawChildren = 2
DrawWindowBackground = 1
ERROR_FORMAT = "<span style='color: red; font-weight: bold'>%s</span>"
HLine = 4
IgnoreMask = 4
NoFrame = 0
class PaintDeviceMetric(value)

Bases: enum.Enum

An enumeration.

PdmWidth = 1
PdmHeight = 2
PdmWidthMM = 3
PdmHeightMM = 4
PdmNumColors = 5
PdmDepth = 6
PdmDpiX = 7
PdmDpiY = 8
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
Panel = 2
PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
Plain = 16
Raised = 32
class RenderFlag(value)

Bases: enum.Flag

An enumeration.

DrawWindowBackground = 1
DrawChildren = 2
IgnoreMask = 4
class Shadow(value)

Bases: enum.IntEnum

An enumeration.

Plain = 16
Raised = 32
Sunken = 48
Shadow_Mask = 240
class Shape(value)

Bases: enum.IntEnum

An enumeration.

NoFrame = 0
Box = 1
Panel = 2
WinPanel = 3
HLine = 4
VLine = 5
StyledPanel = 6
Shape_Mask = 15
class StyleMask(value)

Bases: enum.Enum

An enumeration.

Shadow_Mask = 240
Shape_Mask = 15
StyledPanel = 6
Sunken = 48
VLine = 5
WinPanel = 3
acceptDrops(self) bool
accessibleDescription(self) str
accessibleName(self) str
actionEvent(self, a0: QActionEvent)
actions(self) List[QAction]
activateWindow(self)
addAction(self, action: QAction)
addActions(self, actions: Iterable[QAction])
adjustSize(self)
autoFillBackground(self) bool
backgroundRole(self) QPalette.ColorRole
baseSize(self) QSize
basisModel()

Return the model of basis set names

Returns

The model of basis set names

Return type

PyQt5.QtCore.QAbstractItemModel

blockSignals(self, b: bool) bool
changeEvent(self, a0: QEvent)
childAt(self, p: QPoint) QWidget
childAt(self, ax: int, ay: int) QWidget
childEvent(self, a0: QChildEvent)
children(self) List[QObject]
childrenRect(self) QRect
childrenRegion(self) QRegion
clearFocus(self)
clearMask(self)
close(self) bool
closeEvent(self, a0: QCloseEvent)
colorCount(self) int
connectNotify(self, signal: QMetaMethod)
contentsMargins(self) QMargins
contentsRect(self) QRect
contextMenuEvent(self, a0: QContextMenuEvent)
contextMenuPolicy(self) Qt.ContextMenuPolicy
create(self, window: PyQt6.sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(window: QWindow, parent: typing.Optional[QWidget] = None, flags: Qt.WindowType = Qt.WindowFlags()) QWidget
cursor(self) QCursor
customContextMenuRequested

customContextMenuRequested(self, pos: QPoint) [signal]

customEvent(self, a0: QEvent)
dataChanged
deleteLater(self)
depth(self) int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

devType(self) int
devicePixelRatio(self) float
devicePixelRatioF(self) float
devicePixelRatioFScale() float
disconnect(a0: QMetaObject.Connection) bool
disconnect(self) None
disconnectNotify(self, signal: QMetaMethod)
dragEnterEvent(self, a0: QDragEnterEvent)
dragLeaveEvent(self, a0: QDragLeaveEvent)
dragMoveEvent(self, a0: QDragMoveEvent)
drawFrame(self, a0: QPainter)
dropEvent(self, a0: QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) List[QByteArray]
effectiveWinId(self) PyQt6.sip.voidptr
ensurePolished(self)
enterEvent(self, event: QEnterEvent)
estimateMaxHeight()

Estimate the maximum height of this widget (since the popup’s height may increase when more text is added to the bottom label).

Returns

The estimated maximum height

Return type

int

Note

This function is only an estimate since Qt won’t accurately calculate height until after a redraw. As such, the maximum label height may not be accurate and the presence/absence of the warning icon isn’t taken into account.

estimateMaxWidth()

Return an estimate of the maximum allowable width of this pop up. This estimate is used to ensure that the pop up is positioned within the window. The default implementation uses the current size hint. Subclasses can reimplement this function if they can calculate a more accurate allowable width. This is typically only applicable if the pop up is likely to change size.

Returns

The maximum allowable width

Return type

int

event(self, e: QEvent) bool
eventFilter(self, a0: QObject, a1: QEvent) bool
find(a0: PyQt6.sip.voidptr) QWidget
findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
focusInEvent(self, a0: QFocusEvent)
focusNextChild(self) bool
focusNextPrevChild(self, next: bool) bool
focusOutEvent(self, a0: QFocusEvent)
focusPolicy(self) Qt.FocusPolicy
focusPreviousChild(self) bool
focusProxy(self) QWidget
focusWidget(self) QWidget
font(self) QFont
fontInfo(self) QFontInfo
fontMetrics(self) QFontMetrics
foregroundRole(self) QPalette.ColorRole
frameGeometry(self) QRect
frameRect(self) QRect
frameShadow(self) QFrame.Shadow
frameShape(self) QFrame.Shape
frameSize(self) QSize
frameStyle(self) int
frameWidth(self) int
geometry(self) QRect
getBasis()

Get the currently selected basis

Returns

The currently selected basis

Return type

str

grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) QPixmap
grabGesture(self, type: Qt.GestureType, flags: Qt.GestureFlag = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)
grabMouse(self, a0: Union[QCursor, Qt.CursorShape]) None
grabShortcut(self, key: Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) int
graphicsEffect(self) QGraphicsEffect
graphicsProxyWidget(self) QGraphicsProxyWidget
hasFocus(self) bool
hasHeightForWidth(self) bool
hasMouseTracking(self) bool
hasTabletTracking(self) bool
height(self) int
heightForWidth(self, a0: int) int
heightMM(self) int
hide(self)
hideEvent(event)

Emit a signal every time this pop up is hidden.

inherits(self, classname: str) bool
initPainter(self, painter: QPainter)
initStyleOption(self, option: QStyleOptionFrame)
inputMethodEvent(self, a0: QInputMethodEvent)
inputMethodHints(self) Qt.InputMethodHint
inputMethodQuery(self, a0: Qt.InputMethodQuery) Any
insertAction(self, before: QAction, action: QAction)
insertActions(self, before: QAction, actions: Iterable[QAction])
installEventFilter(self, a0: QObject)
installPopUpEventFilter(event_filter)

Install the provided event filter on all widgets within this pop up that can receive focus.

Note

This function only installs the event filter on immediate children of this widget. As a result, keyboard events on grandchildren (or later descendant) widgets will not be handled properly. If this causes issues, the implementation will have to be modified.

Parameters

event_filter (_BasisSelectorPopUpEventFilter) – The event filter to install

isActiveWindow(self) bool
isAncestorOf(self, child: QWidget) bool
isEnabled(self) bool
isEnabledTo(self, a0: QWidget) bool
isFullScreen(self) bool
isHidden(self) bool
isLeftToRight(self) bool
isMaximized(self) bool
isMinimized(self) bool
isModal(self) bool
isRightToLeft(self) bool
isSignalConnected(self, signal: QMetaMethod) bool
isValid()

Is a valid basis currently selected?

Returns

True is a valid basis is currently selected. False otherwise.

Return type

bool

isVisible(self) bool
isVisibleTo(self, a0: QWidget) bool
isWidgetType(self) bool
isWindow(self) bool
isWindowModified(self) bool
isWindowType(self) bool
keyPressEvent(self, a0: QKeyEvent)
keyReleaseEvent(self, a0: QKeyEvent)
keyboardGrabber() QWidget
killTimer(self, id: int)
layout(self) QLayout
layoutDirection(self) Qt.LayoutDirection
leaveEvent(self, a0: QEvent)
lineEditUpdated(text)

Update this pop up in response to the user changing the line edit text. Note that, by default, this widget will not be able to send signals during execution of this method. This prevents an infinite loop of PopUp.lineEditUpdated and LineEditWithPopUp.popUpUpdated. To modify this behavior, subclass LineEditWithPopUp and reimplement LineEditWithPopUp.popUpUpdated.

Parameters

text (str) – The current text of the line edit

lineWidth(self) int
locale(self) QLocale
logicalDpiX(self) int
logicalDpiY(self) int
lower(self)
mapFrom(self, a0: QWidget, a1: QPoint) QPoint
mapFrom(self, a0: QWidget, a1: QPointF) QPointF
mapFromGlobal(self, a0: QPoint) QPoint
mapFromGlobal(self, a0: QPointF) QPointF
mapFromParent(self, a0: QPoint) QPoint
mapFromParent(self, a0: QPointF) QPointF
mapTo(self, a0: QWidget, a1: QPoint) QPoint
mapTo(self, a0: QWidget, a1: QPointF) QPointF
mapToGlobal(self, a0: QPoint) QPoint
mapToGlobal(self, a0: QPointF) QPointF
mapToParent(self, a0: QPoint) QPoint
mapToParent(self, a0: QPointF) QPointF
mask(self) QRegion
maximumHeight(self) int
maximumSize(self) QSize
maximumWidth(self) int
metaObject(self) QMetaObject
metric(self, a0: QPaintDevice.PaintDeviceMetric) int
midLineWidth(self) int
minimumHeight(self) int
minimumSize(self) QSize
minimumSizeHint(self) QSize
minimumWidth(self) int
mouseDoubleClickEvent(self, a0: QMouseEvent)
mouseGrabber() QWidget
mouseMoveEvent(self, a0: QMouseEvent)
mousePressEvent(self, a0: QMouseEvent)
mouseReleaseEvent(self, a0: QMouseEvent)
move(self, a0: QPoint)
move(self, ax: int, ay: int) None
moveEvent(self, a0: QMoveEvent)
moveToThread(self, thread: QThread)
nativeEvent(self, eventType: QByteArray, message: PyQt6.sip.voidptr) Tuple[bool, PyQt6.sip.voidptr]
nativeParentWidget(self) QWidget
nextInFocusChain(self) QWidget
normalGeometry(self) QRect
objectName(self) str
objectNameChanged

objectNameChanged(self, objectName: str) [signal]

overrideWindowFlags(self, type: Qt.WindowType)
overrideWindowState(self, state: Qt.WindowState)
paintEngine(self) QPaintEngine
paintEvent(self, a0: QPaintEvent)
paintingActive(self) bool
palette(self) QPalette
parent(self) QObject
parentWidget(self) QWidget
physicalDpiX(self) int
physicalDpiY(self) int
popUpResized
pos(self) QPoint
previousInFocusChain(self) QWidget
property(self, name: str) Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, signal: PYQT_SIGNAL) int
rect(self) QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, id: int)
removeAction(self, action: QAction)
removeEventFilter(self, a0: QObject)
render(self, target: QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))
render(self, painter: QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren)) None
repaint(self)
repaint(self, x: int, y: int, w: int, h: int) None
repaint(self, a0: QRect) None
repaint(self, a0: QRegion) None
resize(self, a0: QSize)
resize(self, w: int, h: int) None
resizeEvent(self, a0: QResizeEvent)
restoreGeometry(self, geometry: QByteArray) bool
saveGeometry(self) QByteArray
screen(self) QScreen
scroll(self, dx: int, dy: int)
scroll(self, dx: int, dy: int, a2: QRect) None
sender(self) QObject
senderSignalIndex(self) int
setAcceptDrops(self, on: bool)
setAccessibleDescription(self, description: str)
setAccessibleName(self, name: str)
setAtomNum(atom_num)

Set the atom number. The basis selector will now allow the user to select a basis set for the specified atom rather than for the entire structure. Note that this function will clear any per-atom basis sets that have been set via setPerAtom.

Parameters

atom_num (int) – The atom index

setAttribute(self, attribute: Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, enabled: bool)
setBackgroundRole(self, a0: QPalette.ColorRole)
setBaseSize(self, basew: int, baseh: int)
setBaseSize(self, s: QSize) None
setBasis(basis_full=None)

Set the basis to the requested value. If no value is given, the default basis (6-31G**) will be used.

Parameters

basis_full (str or NoneType) – The requested basis. Note that this name may include *’s and +’s.

Raises

ValueError – If the requested basis was not valid. In these cases, the basis set will not be changed and basis_changed will not be emitted.

setBasisSafe(basis_full='')

Set the basis to the requested value. If the provided basis name is invalid, then the combo boxes will be cleared. (With setBasis(), an exception is raised if the basis name is invalid.)

Parameters

basis_full (str) – The requested basis set name including any *’s and +’s.

Returns

True if the basis was valid. False otherwise.

Return type

bool

setBlankBasisAllowed(allowed)

Specify whether a blank basis set is allowed or should result in an “Invalid basis set” warning.

Parameters

allowed (bool) – True if a blank basis set should be allowed. False if a blank basis set should result in an invalid basis set warning.

setContentsMargins(self, left: int, top: int, right: int, bottom: int)
setContentsMargins(self, margins: QMargins) None
setContextMenuPolicy(self, policy: Qt.ContextMenuPolicy)
setCursor(self, a0: Union[QCursor, Qt.CursorShape])
setDisabled(self, a0: bool)
setEnabled(self, a0: bool)
setFixedHeight(self, h: int)
setFixedSize(self, a0: QSize)
setFixedSize(self, w: int, h: int) None
setFixedWidth(self, w: int)
setFocus(self)
setFocus(self, reason: Qt.FocusReason) None
setFocusPolicy(self, policy: Qt.FocusPolicy)
setFocusProxy(self, a0: QWidget)
setFont(self, a0: QFont)
setForegroundRole(self, a0: QPalette.ColorRole)
setFrameRect(self, a0: QRect)
setFrameShadow(self, a0: QFrame.Shadow)
setFrameShape(self, a0: QFrame.Shape)
setFrameStyle(self, a0: int)
setGeometry(self, a0: QRect)
setGeometry(self, ax: int, ay: int, aw: int, ah: int) None
setGraphicsEffect(self, effect: QGraphicsEffect)
setHidden(self, hidden: bool)
setInputMethodHints(self, hints: Qt.InputMethodHint)
setLayout(self, a0: QLayout)
setLayoutDirection(self, direction: Qt.LayoutDirection)
setLineWidth(self, a0: int)
setLocale(self, locale: QLocale)
setMask(self, a0: QBitmap)
setMask(self, a0: QRegion) None
setMaximumHeight(self, maxh: int)
setMaximumSize(self, maxw: int, maxh: int)
setMaximumSize(self, s: QSize) None
setMaximumWidth(self, maxw: int)
setMidLineWidth(self, a0: int)
setMinimumHeight(self, minh: int)
setMinimumSize(self, minw: int, minh: int)
setMinimumSize(self, s: QSize) None
setMinimumWidth(self, minw: int)
setMouseTracking(self, enable: bool)
setObjectName(self, name: str)
setPalette(self, a0: QPalette)
setParent(self, parent: QWidget)
setParent(self, parent: QWidget, f: Qt.WindowType) None
setPerAtom(per_atom)

Set the per-atom basis sets for the current structure. These basis sets will be used when calculating the available basis sets and the number of basis functions. Note that this function will clear any atom number that has been set via setAtomNum.

Parameters

per_atom (dict) – A dictionary of {atom index: basis name} for per-atom basis sets.

setProperty(self, name: str, value: Any) bool
setScreen(self, a0: QScreen)
setShortcutAutoRepeat(self, id: int, enabled: bool = True)
setShortcutEnabled(self, id: int, enabled: bool = True)
setSizeIncrement(self, w: int, h: int)
setSizeIncrement(self, s: QSize) None
setSizePolicy(self, a0: QSizePolicy)
setSizePolicy(self, hor: QSizePolicy.Policy, ver: QSizePolicy.Policy) None
setStatusTip(self, a0: str)
setStructure(new_struc)

React to the user changing the selected structure by updating or disabling the basis selection.

Parameters

new_struc (schrodinger.structure.Structure) – The new structure

setStyle(self, a0: QStyle)
setStyleSheet(self, styleSheet: str)
setTabOrder(a0: QWidget, a1: QWidget)
setTabletTracking(self, enable: bool)
setToolTip(self, a0: str)
setToolTipDuration(self, msec: int)
setUpdatesEnabled(self, enable: bool)
setVisible(self, visible: bool)
setWhatsThis(self, a0: str)
setWindowFilePath(self, filePath: str)
setWindowFlag(self, a0: Qt.WindowType, on: bool = True)
setWindowFlags(self, type: Qt.WindowType)
setWindowIcon(self, icon: QIcon)
setWindowIconText(self, a0: str)
setWindowModality(self, windowModality: Qt.WindowModality)
setWindowModified(self, a0: bool)
setWindowOpacity(self, level: float)
setWindowRole(self, a0: str)
setWindowState(self, state: Qt.WindowState)
setWindowTitle(self, a0: str)
setup(**kwargs)

Subclass-specific initialization. Subclasses must implement this function.

sharedPainter(self) QPainter
show(self)
showEvent(event)

Emit a signal every time this pop up is shown.

showFullScreen(self)
showMaximized(self)
showMinimized(self)
showNormal(self)
signalsBlocked(self) bool
size(self) QSize
sizeHint(self) QSize
sizeIncrement(self) QSize
sizePolicy(self) QSizePolicy
stackUnder(self, a0: QWidget)
startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) int
staticMetaObject = <PyQt6.QtCore.QMetaObject object>
statusTip(self) str
structureUpdated()

React to a change in the structure described by self._struc. i.e. The schrodinger.structure.Structure object passed to setStructure has not changed, but the structure described by that object has.

style(self) QStyle
styleSheet(self) str
subWidgetHasFocus()

Return True if any widget within the pop up has focus. False otherwise.

Note

Note that combo boxes have various list view and frame children that can receive focus (and which of these widgets can receive focus varies by OS). As a result, we check the full ancestry of the focus widget here rather than just checking it’s parent. Also note that we can’t use Qt’s isAncestorOf() function to check ancestry, since combo box drop downs are considered to be their own window and isAncestorOf() requires ancestors to be part of the same window.

tabletEvent(self, a0: QTabletEvent)
testAttribute(self, attribute: Qt.WidgetAttribute) bool
thread(self) QThread
timerEvent(self, a0: QTimerEvent)
toolTip(self) str
toolTipDuration(self) int
tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) str
underMouse(self) bool
ungrabGesture(self, type: Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)
update(self, a0: QRect) None
update(self, a0: QRegion) None
update(self, ax: int, ay: int, aw: int, ah: int) None
updateGeometry(self)
updateMicroFocus(self, query: Qt.InputMethodQuery = Qt.ImQueryAll)
updatesEnabled(self) bool
visibilityChanged
visibleRegion(self) QRegion
whatsThis(self) str
wheelEvent(self, a0: QWheelEvent)
width(self) int
widthMM(self) int
winId(self) PyQt6.sip.voidptr
window(self) QWidget
windowFilePath(self) str
windowFlags(self) Qt.WindowType
windowHandle(self) QWindow
windowIcon(self) QIcon
windowIconChanged

windowIconChanged(self, icon: QIcon) [signal]

windowIconText(self) str
windowIconTextChanged

windowIconTextChanged(self, iconText: str) [signal]

windowModality(self) Qt.WindowModality
windowOpacity(self) float
windowRole(self) str
windowState(self) Qt.WindowState
windowTitle(self) str
windowTitleChanged

windowTitleChanged(self, title: str) [signal]

windowType(self) Qt.WindowType
x(self) int
y(self) int
class schrodinger.application.jaguar.gui.basis_selector.BasisSetListWidgetItem(text, full_name=None, is_diffuse=False, is_pseudospectral=False, is_ecp=False, is_relativistic=False, is_rimp2_compatible=False)

Bases: PyQt6.QtWidgets.QListWidgetItem

Custom QListWidgetItem that is associated with a specific basis set.

__init__(text, full_name=None, is_diffuse=False, is_pseudospectral=False, is_ecp=False, is_relativistic=False, is_rimp2_compatible=False)
Parameters
  • text (str) – Text for this list item.

  • full_name (str or None) – Full name for the basis set. If not specified, the value of text will be used.

  • is_diffuse (bool) – Whether this basis set is diffuse.

  • is_pseudospectral (bool) – Whether this basis set is pseudospectral.

  • is_ecp (bool) – Whether this basis set is ECP.

  • is_relativistic (bool) – Whether this basis set is relativistic.

  • is_rimp2_compatible (bool) – Whether this basis set has an automatically associated rimp2_auxbas

class ItemType(value)

Bases: enum.IntEnum

An enumeration.

Type = 0
UserType = 1000
Type = 0
UserType = 1000
background(self) QBrush
checkState(self) Qt.CheckState
clone(self) QListWidgetItem
data(self, role: int) Any
flags(self) Qt.ItemFlag
font(self) QFont
foreground(self) QBrush
icon(self) QIcon
isHidden(self) bool
isSelected(self) bool
listWidget(self) QListWidget
read(self, in_: QDataStream)
setBackground(self, brush: Union[QBrush, QColor, Qt.GlobalColor, int, QGradient])
setCheckState(self, state: Qt.CheckState)
setData(self, role: int, value: Any)
setFlags(self, aflags: Qt.ItemFlag)
setFont(self, afont: QFont)
setForeground(self, brush: Union[QBrush, QColor, Qt.GlobalColor, int, QGradient])
setHidden(self, ahide: bool)
setIcon(self, aicon: QIcon)
setSelected(self, aselect: bool)
setSizeHint(self, size: QSize)
setStatusTip(self, astatusTip: str)
setText(self, atext: str)
setTextAlignment(self, alignment: int)
setToolTip(self, atoolTip: str)
setWhatsThis(self, awhatsThis: str)
sizeHint(self) QSize
statusTip(self) str
text(self) str
textAlignment(self) int
toolTip(self) str
type(self) int
whatsThis(self) str
write(self, out: QDataStream)
class schrodinger.application.jaguar.gui.basis_selector.BasisSelectorFilterPopUp(parent)

Bases: schrodinger.ui.qt.filter_list.FilterListPopUp

A pop up widget that allows for dynamic filtering and selection of basis sets.

__init__(parent)
Parameters

parent (QtWidgets.QWidget) – The parent widget.

setStructure(new_struc)

React to the user changing the selected structure by updating or disabling the basis selection.

Parameters

new_struc (schrodinger.structure.Structure or None) – The new structure or None to clear structure.

setPerAtom(per_atom)

Set the per-atom basis sets for the current structure. These basis sets will be used when calculating the available basis sets and the number of basis functions. Note that this function will clear any atom number that has been set via setAtomNum.

Parameters

per_atom (dict) – A dictionary of {atom index: basis name} for per-atom basis sets.

setAtomNum(atom_num)

Set the atom number. The basis selector will now allow the user to select a basis set for the specified atom rather than for the entire structure. Note that this function will clear any per-atom basis sets that have been set via setPerAtom.

Parameters

atom_num (int) – The atom index

structureUpdated()

React to a change in the structure described by self._struc. i.e. The schrodinger.structure.Structure object passed to setStructure has not changed, but the structure described by that object has.

isValid()

Is a valid basis currently selected?

Returns

True is a valid basis is currently selected. False otherwise.

Return type

bool

getBasis()

Get the currently selected basis

Returns

The currently selected basis or None if no basis is selected.

Return type

str or None

setBasis(basis_full=None)

Set the basis to the requested value. If no value is given, the default basis (6-31G**) will be used.

Parameters

basis_full (str or NoneType) – The requested basis. Note that this name may include *’s and +’s. If None is passed the default will be used.

Raises

ValueError – If the requested basis was not valid. In these cases, the basis set will not be changed and basis_changed will not be emitted.

setBasisSafe(basis_full='')

Set the basis to the requested value. If the provided basis name is invalid, then the combo boxes will be cleared. (With setBasis(), an exception is raised if the basis name is invalid.)

Parameters

basis_full (str) – The requested basis set name including any *’s and +’s.

Returns

True if the basis was valid. False otherwise.

Return type

bool

basisModel()

Return the model of basis set names

Returns

The model of basis set names

Return type

PyQt5.QtCore.QAbstractItemModel

setNoStrucAllowed(allow_no_struc)

Set whether a structure must be set on this popup.

Parameters

allow_no_struc (bool) – Whether a structure must be set or not.

setBlankBasisAllowed(allowed)

Specify whether a blank basis set is allowed

Parameters

allowed (bool) – True if a blank basis set should be allowed

hasAcceptableInput()

Return True if the current basis set is valid, False otherwise.

Return type

bool

Box = 1
DrawChildren = 2
DrawWindowBackground = 1
HLine = 4
IgnoreMask = 4
NoFrame = 0
class PaintDeviceMetric(value)

Bases: enum.Enum

An enumeration.

PdmWidth = 1
PdmHeight = 2
PdmWidthMM = 3
PdmHeightMM = 4
PdmNumColors = 5
PdmDepth = 6
PdmDpiX = 7
PdmDpiY = 8
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
Panel = 2
PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
Plain = 16
Raised = 32
class RenderFlag(value)

Bases: enum.Flag

An enumeration.

DrawWindowBackground = 1
DrawChildren = 2
IgnoreMask = 4
class Shadow(value)

Bases: enum.IntEnum

An enumeration.

Plain = 16
Raised = 32
Sunken = 48
Shadow_Mask = 240
class Shape(value)

Bases: enum.IntEnum

An enumeration.

NoFrame = 0
Box = 1
Panel = 2
WinPanel = 3
HLine = 4
VLine = 5
StyledPanel = 6
Shape_Mask = 15
class StyleMask(value)

Bases: enum.Enum

An enumeration.

Shadow_Mask = 240
Shape_Mask = 15
StyledPanel = 6
Sunken = 48
VLine = 5
WinPanel = 3
acceptDrops(self) bool
accessibleDescription(self) str
accessibleName(self) str
actionEvent(self, a0: QActionEvent)
actions(self) List[QAction]
activateWindow(self)
addAction(self, action: QAction)
addActions(self, actions: Iterable[QAction])
adjustSize(self)
applyAliasedSettings(settings)

Applies any aliased settings with new values from the dictionary. Any aliases not present in the settings dictionary will be left unchanged.

Parameters

settings (dict) – a dictionary mapping aliases to new values to apply

applyFilters()

Apply the current filter text and predefined filters to the list contents.

applySettings(settings, target=None)
autoFillBackground(self) bool
backgroundRole(self) QPalette.ColorRole
baseSize(self) QSize
blockSignals(self, b: bool) bool
changeEvent(self, a0: QEvent)
childAt(self, p: QPoint) QWidget
childAt(self, ax: int, ay: int) QWidget
childEvent(self, a0: QChildEvent)
children(self) List[QObject]
childrenRect(self) QRect
childrenRegion(self) QRegion
clearFilters()

Clear all item filters.

clearFocus(self)
clearMask(self)
close(self) bool
closeEvent(self, a0: QCloseEvent)
colorCount(self) int
connectNotify(self, signal: QMetaMethod)
contentsMargins(self) QMargins
contentsRect(self) QRect
contextMenuEvent(self, a0: QContextMenuEvent)
contextMenuPolicy(self) Qt.ContextMenuPolicy
create(self, window: PyQt6.sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(window: QWindow, parent: typing.Optional[QWidget] = None, flags: Qt.WindowType = Qt.WindowFlags()) QWidget
cursor(self) QCursor
customContextMenuRequested

customContextMenuRequested(self, pos: QPoint) [signal]

customEvent(self, a0: QEvent)
dataChanged
deleteLater(self)
depth(self) int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

devType(self) int
devicePixelRatio(self) float
devicePixelRatioF(self) float
devicePixelRatioFScale() float
disconnect(a0: QMetaObject.Connection) bool
disconnect(self) None
disconnectNotify(self, signal: QMetaMethod)
dragEnterEvent(self, a0: QDragEnterEvent)
dragLeaveEvent(self, a0: QDragLeaveEvent)
dragMoveEvent(self, a0: QDragMoveEvent)
drawFrame(self, a0: QPainter)
dropEvent(self, a0: QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) List[QByteArray]
effectiveWinId(self) PyQt6.sip.voidptr
ensurePolished(self)
enterEvent(self, event: QEnterEvent)
estimateMaxHeight()

Return an estimate of the maximum allowable height of this pop up. This estimate is used to ensure that the pop up is positioned within the window. The default implementation uses the current size hint. Subclasses can reimplement this function if they can calculate a more accurate allowable height. This is typically only applicable if the pop up is likely to change size.

Returns

The maximum allowable height

Return type

int

estimateMaxWidth()

Return an estimate of the maximum allowable width of this pop up. This estimate is used to ensure that the pop up is positioned within the window. The default implementation uses the current size hint. Subclasses can reimplement this function if they can calculate a more accurate allowable width. This is typically only applicable if the pop up is likely to change size.

Returns

The maximum allowable width

Return type

int

event(self, e: QEvent) bool
eventFilter(self, a0: QObject, a1: QEvent) bool
filtersChanged
find(a0: PyQt6.sip.voidptr) QWidget
findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
focusInEvent(self, a0: QFocusEvent)
focusNextChild(self) bool
focusNextPrevChild(self, next: bool) bool
focusOutEvent(self, a0: QFocusEvent)
focusPolicy(self) Qt.FocusPolicy
focusPreviousChild(self) bool
focusProxy(self) QWidget
focusWidget(self) QWidget
font(self) QFont
fontInfo(self) QFontInfo
fontMetrics(self) QFontMetrics
foregroundRole(self) QPalette.ColorRole
frameGeometry(self) QRect
frameRect(self) QRect
frameShadow(self) QFrame.Shadow
frameShape(self) QFrame.Shape
frameSize(self) QSize
frameStyle(self) int
frameWidth(self) int
geometry(self) QRect
getAliasedSettings()
getAliasedValue(alias)
getObjValue(obj)
getPersistenceKey(alias)

Return a unique identifier for saving/restoring a setting in the preferences. Override this method to change the key scheme (this is necessary if creating a common resource which is shared by multiple panels).

Parameters

alias (str) – the alias for which we are generating a key

getSettings(target=None, ignore_list=None)
grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) QPixmap
grabGesture(self, type: Qt.GestureType, flags: Qt.GestureFlag = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)
grabMouse(self, a0: Union[QCursor, Qt.CursorShape]) None
grabShortcut(self, key: Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) int
graphicsEffect(self) QGraphicsEffect
graphicsProxyWidget(self) QGraphicsProxyWidget
hasFocus(self) bool
hasHeightForWidth(self) bool
hasMouseTracking(self) bool
hasTabletTracking(self) bool
height(self) int
heightForWidth(self, a0: int) int
heightMM(self) int
hide(self)
hideEvent(event)

Emit a signal every time this pop up is hidden.

inherits(self, classname: str) bool
initPainter(self, painter: QPainter)
initStyleOption(self, option: QStyleOptionFrame)
inputMethodEvent(self, a0: QInputMethodEvent)
inputMethodHints(self) Qt.InputMethodHint
inputMethodQuery(self, a0: Qt.InputMethodQuery) Any
insertAction(self, before: QAction, action: QAction)
insertActions(self, before: QAction, actions: Iterable[QAction])
installEventFilter(self, a0: QObject)
installPopUpEventFilter(event_filter)

Install the provided event filter on all widgets within this pop up that can receive focus.

Note

This function only installs the event filter on immediate children of this widget. As a result, keyboard events on grandchildren (or later descendant) widgets will not be handled properly. If this causes issues, the implementation will have to be modified.

Parameters

event_filter (_BasisSelectorPopUpEventFilter) – The event filter to install

isActiveWindow(self) bool
isAncestorOf(self, child: QWidget) bool
isEnabled(self) bool
isEnabledTo(self, a0: QWidget) bool
isFullScreen(self) bool
isHidden(self) bool
isItemHidden(item_txt)
Returns

True if the item with the specified text is in the list and hidden, False otherwise.

Return type

bool

isLeftToRight(self) bool
isMaximized(self) bool
isMinimized(self) bool
isModal(self) bool
isRightToLeft(self) bool
isSignalConnected(self, signal: QMetaMethod) bool
isVisible(self) bool
isVisibleTo(self, a0: QWidget) bool
isWidgetType(self) bool
isWindow(self) bool
isWindowModified(self) bool
isWindowType(self) bool
keyPressEvent(event)

Close the popup if enter/return is pressed.

See Qt documentation for argument documentation.

keyReleaseEvent(self, a0: QKeyEvent)
keyboardGrabber() QWidget
killTimer(self, id: int)
layout(self) QLayout
layoutDirection(self) Qt.LayoutDirection
leaveEvent(self, a0: QEvent)
lineEditUpdated(text)

Update this pop up in response to the user changing the line edit text. Note that, by default, this widget will not be able to send signals during execution of this method. This prevents an infinite loop of PopUp.lineEditUpdated and LineEditWithPopUp.popUpUpdated. To modify this behavior, subclass LineEditWithPopUp and reimplement LineEditWithPopUp.popUpUpdated.

Parameters

text (str) – The current text of the line edit

lineWidth(self) int
loadPersistentOptions()

Load all persistent options from the preferences.

locale(self) QLocale
logicalDpiX(self) int
logicalDpiY(self) int
lower(self)
mapFrom(self, a0: QWidget, a1: QPoint) QPoint
mapFrom(self, a0: QWidget, a1: QPointF) QPointF
mapFromGlobal(self, a0: QPoint) QPoint
mapFromGlobal(self, a0: QPointF) QPointF
mapFromParent(self, a0: QPoint) QPoint
mapFromParent(self, a0: QPointF) QPointF
mapTo(self, a0: QWidget, a1: QPoint) QPoint
mapTo(self, a0: QWidget, a1: QPointF) QPointF
mapToGlobal(self, a0: QPoint) QPoint
mapToGlobal(self, a0: QPointF) QPointF
mapToParent(self, a0: QPoint) QPoint
mapToParent(self, a0: QPointF) QPointF
mask(self) QRegion
maximumHeight(self) int
maximumSize(self) QSize
maximumWidth(self) int
metaObject(self) QMetaObject
metric(self, a0: QPaintDevice.PaintDeviceMetric) int
midLineWidth(self) int
minimumHeight(self) int
minimumSize(self) QSize
minimumSizeHint(self) QSize
minimumWidth(self) int
mouseDoubleClickEvent(self, a0: QMouseEvent)
mouseGrabber() QWidget
mouseMoveEvent(self, a0: QMouseEvent)
mousePressEvent(self, a0: QMouseEvent)
mouseReleaseEvent(self, a0: QMouseEvent)
move(self, a0: QPoint)
move(self, ax: int, ay: int) None
moveEvent(self, a0: QMoveEvent)
moveToThread(self, thread: QThread)
nativeEvent(self, eventType: QByteArray, message: PyQt6.sip.voidptr) Tuple[bool, PyQt6.sip.voidptr]
nativeParentWidget(self) QWidget
nextInFocusChain(self) QWidget
normalGeometry(self) QRect
objectName(self) str
objectNameChanged

objectNameChanged(self, objectName: str) [signal]

onDataChanged()

Emit the dataChanged signal when a new item is selected.

onReturnPressed()

Check if an item has been selected and, if so, set that item as the current item. If a current item has been set, hide the popup.

overrideWindowFlags(self, type: Qt.WindowType)
overrideWindowState(self, state: Qt.WindowState)
paintEngine(self) QPaintEngine
paintEvent(self, a0: QPaintEvent)
paintingActive(self) bool
palette(self) QPalette
parent(self) QObject
parentWidget(self) QWidget
physicalDpiX(self) int
physicalDpiY(self) int
popUpResized
pos(self) QPoint
previousInFocusChain(self) QWidget
property(self, name: str) Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, signal: PYQT_SIGNAL) int
rect(self) QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, id: int)
removeAction(self, action: QAction)
removeEventFilter(self, a0: QObject)
render(self, target: QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))
render(self, painter: QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren)) None
repaint(self)
repaint(self, x: int, y: int, w: int, h: int) None
repaint(self, a0: QRect) None
repaint(self, a0: QRegion) None
resize(self, a0: QSize)
resize(self, w: int, h: int) None
resizeEvent(self, a0: QResizeEvent)
restoreGeometry(self, geometry: QByteArray) bool
saveGeometry(self) QByteArray
savePersistentOptions()

Store all persistent options to the preferences.

screen(self) QScreen
scroll(self, dx: int, dy: int)
scroll(self, dx: int, dy: int, a2: QRect) None
sender(self) QObject
senderSignalIndex(self) int
setAcceptDrops(self, on: bool)
setAccessibleDescription(self, description: str)
setAccessibleName(self, name: str)
setAlias(alias, obj, persistent=False)

Sets an alias to conveniently access an object.

Parameters
  • alias (hashable) – any hashable, but typically a string name

  • obj (object) – the actual object to be referenced

  • persistent (bool) – whether to make the setting persistent

setAliasedValue(alias, value)
setAliases(alias_dict, persistent=False)

Sets multiple aliases at once. Already used aliases are overwritten; other existing aliases are not affected.

Parameters
  • alias_dict (dict) – map of aliases to objects

  • persistent (bool) – whether to make the settings persistent

setAttribute(self, attribute: Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, enabled: bool)
setBackgroundRole(self, a0: QPalette.ColorRole)
setBaseSize(self, basew: int, baseh: int)
setBaseSize(self, s: QSize) None
setContentsMargins(self, left: int, top: int, right: int, bottom: int)
setContentsMargins(self, margins: QMargins) None
setContextMenuPolicy(self, policy: Qt.ContextMenuPolicy)
setCursor(self, a0: Union[QCursor, Qt.CursorShape])
setDisabled(self, a0: bool)
setEnabled(self, a0: bool)
setFixedHeight(self, h: int)
setFixedSize(self, a0: QSize)
setFixedSize(self, w: int, h: int) None
setFixedWidth(self, w: int)
setFocus(self)
setFocus(self, reason: Qt.FocusReason) None
setFocusPolicy(self, policy: Qt.FocusPolicy)
setFocusProxy(self, a0: QWidget)
setFont(self, a0: QFont)
setForegroundRole(self, a0: QPalette.ColorRole)
setFrameRect(self, a0: QRect)
setFrameShadow(self, a0: QFrame.Shadow)
setFrameShape(self, a0: QFrame.Shape)
setFrameStyle(self, a0: int)
setGeometry(self, a0: QRect)
setGeometry(self, ax: int, ay: int, aw: int, ah: int) None
setGraphicsEffect(self, effect: QGraphicsEffect)
setHidden(self, hidden: bool)
setInputMethodHints(self, hints: Qt.InputMethodHint)
setLayout(self, a0: QLayout)
setLayoutDirection(self, direction: Qt.LayoutDirection)
setLineWidth(self, a0: int)
setLocale(self, locale: QLocale)
setMask(self, a0: QBitmap)
setMask(self, a0: QRegion) None
setMaximumHeight(self, maxh: int)
setMaximumSize(self, maxw: int, maxh: int)
setMaximumSize(self, s: QSize) None
setMaximumWidth(self, maxw: int)
setMidLineWidth(self, a0: int)
setMinimumHeight(self, minh: int)
setMinimumSize(self, minw: int, minh: int)
setMinimumSize(self, s: QSize) None
setMinimumWidth(self, minw: int)
setMouseTracking(self, enable: bool)
setObjValue(obj, value)
setObjectName(self, name: str)
setPalette(self, a0: QPalette)
setParent(self, parent: QWidget)
setParent(self, parent: QWidget, f: Qt.WindowType) None
setPersistent(alias=None)

Set options to be persistent. Any options to be made persistent must be aliased, since the alias is used to form the preference key. If no alias is specified, all aliased settings will be made persistent.

Parameters

alias (str or None) – the alias to save, or None

setProperty(self, name: str, value: Any) bool
setScreen(self, a0: QScreen)
setShortcutAutoRepeat(self, id: int, enabled: bool = True)
setShortcutEnabled(self, id: int, enabled: bool = True)
setSizeIncrement(self, w: int, h: int)
setSizeIncrement(self, s: QSize) None
setSizePolicy(self, a0: QSizePolicy)
setSizePolicy(self, hor: QSizePolicy.Policy, ver: QSizePolicy.Policy) None
setStatusTip(self, a0: str)
setStyle(self, a0: QStyle)
setStyleSheet(self, styleSheet: str)
setTabOrder(a0: QWidget, a1: QWidget)
setTabletTracking(self, enable: bool)
setToolTip(self, a0: str)
setToolTipDuration(self, msec: int)
setUpdatesEnabled(self, enable: bool)
setVisible(self, visible: bool)
setWhatsThis(self, a0: str)
setWindowFilePath(self, filePath: str)
setWindowFlag(self, a0: Qt.WindowType, on: bool = True)
setWindowFlags(self, type: Qt.WindowType)
setWindowIcon(self, icon: QIcon)
setWindowIconText(self, a0: str)
setWindowModality(self, windowModality: Qt.WindowModality)
setWindowModified(self, a0: bool)
setWindowOpacity(self, level: float)
setWindowRole(self, a0: str)
setWindowState(self, state: Qt.WindowState)
setWindowTitle(self, a0: str)
setup()

Sets up the widget’s UI and connections.

sharedPainter(self) QPainter
show(self)
showEvent(event)

Emit a signal every time this pop up is shown.

showFullScreen(self)
showMaximized(self)
showMinimized(self)
showNormal(self)
signalsBlocked(self) bool
size(self) QSize
sizeHint(self) QSize
sizeIncrement(self) QSize
sizePolicy(self) QSizePolicy
stackUnder(self, a0: QWidget)
startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) int
staticMetaObject = <PyQt6.QtCore.QMetaObject object>
statusTip(self) str
style(self) QStyle
styleSheet(self) str
subWidgetHasFocus()

Return True if any widget within the pop up has focus. False otherwise.

Note

Note that combo boxes have various list view and frame children that can receive focus (and which of these widgets can receive focus varies by OS). As a result, we check the full ancestry of the focus widget here rather than just checking it’s parent. Also note that we can’t use Qt’s isAncestorOf() function to check ancestry, since combo box drop downs are considered to be their own window and isAncestorOf() requires ancestors to be part of the same window.

tabletEvent(self, a0: QTabletEvent)
testAttribute(self, attribute: Qt.WidgetAttribute) bool
thread(self) QThread
timerEvent(self, a0: QTimerEvent)
toolTip(self) str
toolTipDuration(self) int
tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) str
underMouse(self) bool
ungrabGesture(self, type: Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)
update(self, a0: QRect) None
update(self, a0: QRegion) None
update(self, ax: int, ay: int, aw: int, ah: int) None
updateGeometry(self)
updateMicroFocus(self, query: Qt.InputMethodQuery = Qt.ImQueryAll)
updatesEnabled(self) bool
visibilityChanged
visibleRegion(self) QRegion
whatsThis(self) str
wheelEvent(self, a0: QWheelEvent)
width(self) int
widthMM(self) int
winId(self) PyQt6.sip.voidptr
window(self) QWidget
windowFilePath(self) str
windowFlags(self) Qt.WindowType
windowHandle(self) QWindow
windowIcon(self) QIcon
windowIconChanged

windowIconChanged(self, icon: QIcon) [signal]

windowIconText(self) str
windowIconTextChanged

windowIconTextChanged(self, iconText: str) [signal]

windowModality(self) Qt.WindowModality
windowOpacity(self) float
windowRole(self) str
windowState(self) Qt.WindowState
windowTitle(self) str
windowTitleChanged

windowTitleChanged(self, title: str) [signal]

windowType(self) Qt.WindowType
x(self) int
y(self) int
class schrodinger.application.jaguar.gui.basis_selector.BasisSelectorFilterListToolButton(parent)

Bases: schrodinger.ui.qt.filter_list.ToolButtonWithFilterListPopUp

Custom tool button with a basis selector filter list pop up.

POP_UP_CLASS

alias of schrodinger.application.jaguar.gui.basis_selector.BasisSelectorFilterPopUp

getBasis()
setBasis(basis)
hasAcceptableInput()

Return True if a valid basis set has been specified. False otherwise.

setStructure(struct)

Set the structure on the popup.

Parameters

struct (schrodinger.structure.Structure or None) – Structure to be set, or None to unset a structure.

applySettings(settings)

Apply the specified filter settings to the pop up

Parameters

settings (dict) – Settings to be applied

ALIGN_AUTO = 4
ALIGN_BOTTOM = 1
ALIGN_LEFT = 3
ALIGN_RIGHT = 2
ALIGN_TOP = 0
DelayedPopup = 0
DrawChildren = 2
DrawWindowBackground = 1
IgnoreMask = 4
InstantPopup = 2
MenuButtonPopup = 1
class PaintDeviceMetric(value)

Bases: enum.Enum

An enumeration.

PdmWidth = 1
PdmHeight = 2
PdmWidthMM = 3
PdmHeightMM = 4
PdmNumColors = 5
PdmDepth = 6
PdmDpiX = 7
PdmDpiY = 8
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag(value)

Bases: enum.Flag

An enumeration.

DrawWindowBackground = 1
DrawChildren = 2
IgnoreMask = 4
class ToolButtonPopupMode(value)

Bases: enum.Enum

An enumeration.

DelayedPopup = 0
MenuButtonPopup = 1
InstantPopup = 2
__init__(parent)
Parameters
  • parent (PyQt5.QtWidgets.QWidget) – The Qt parent widget

  • pop_up_class (type) – The class of the pop up widget. Should be a subclass of PopUp.

  • arrow_type (Qt.ArrowType) – Type of arrow to display in the button

  • text (str) – Text to set for this button. If not specified, only an icon will be shown.

acceptDrops(self) bool
accessibleDescription(self) str
accessibleName(self) str
actionEvent(self, a0: QActionEvent)
actions(self) List[QAction]
activateWindow(self)
addAction(self, action: QAction)
addActions(self, actions: Iterable[QAction])
adjustSize(self)
animateClick(self)
arrowType(self) Qt.ArrowType
autoExclusive(self) bool
autoFillBackground(self) bool
autoRaise(self) bool
autoRepeat(self) bool
autoRepeatDelay(self) int
autoRepeatInterval(self) int
backgroundRole(self) QPalette.ColorRole
baseSize(self) QSize
blockSignals(self, b: bool) bool
changeEvent(self, a0: QEvent)
checkStateSet(self)
childAt(self, p: QPoint) QWidget
childAt(self, ax: int, ay: int) QWidget
childEvent(self, a0: QChildEvent)
children(self) List[QObject]
childrenRect(self) QRect
childrenRegion(self) QRegion
clearFilters()

Clear all pop up filters

clearFocus(self)
clearMask(self)
click(self)
clicked

clicked(self, checked: bool = False) [signal]

close(self) bool
closeEvent(self, a0: QCloseEvent)
colorCount(self) int
connectNotify(self, signal: QMetaMethod)
contentsMargins(self) QMargins
contentsRect(self) QRect
contextMenuEvent(self, a0: QContextMenuEvent)
contextMenuPolicy(self) Qt.ContextMenuPolicy
create(self, window: PyQt6.sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(window: QWindow, parent: typing.Optional[QWidget] = None, flags: Qt.WindowType = Qt.WindowFlags()) QWidget
cursor(self) QCursor
customContextMenuRequested

customContextMenuRequested(self, pos: QPoint) [signal]

customEvent(self, a0: QEvent)
defaultAction(self) QAction
deleteLater(self)
depth(self) int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

devType(self) int
devicePixelRatio(self) float
devicePixelRatioF(self) float
devicePixelRatioFScale() float
disconnect(a0: QMetaObject.Connection) bool
disconnect(self) None
disconnectNotify(self, signal: QMetaMethod)
dragEnterEvent(self, a0: QDragEnterEvent)
dragLeaveEvent(self, a0: QDragLeaveEvent)
dragMoveEvent(self, a0: QDragMoveEvent)
dropEvent(self, a0: QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) List[QByteArray]
effectiveWinId(self) PyQt6.sip.voidptr
ensurePolished(self)
enterEvent(self, a0: QEnterEvent)
event(self, e: QEvent) bool
eventFilter(self, a0: QObject, a1: QEvent) bool
filtersChanged
find(a0: PyQt6.sip.voidptr) QWidget
findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
focusInEvent(self, e: QFocusEvent)
focusNextChild(self) bool
focusNextPrevChild(self, next: bool) bool
focusOutEvent(self, e: QFocusEvent)
focusPolicy(self) Qt.FocusPolicy
focusPreviousChild(self) bool
focusProxy(self) QWidget
focusWidget(self) QWidget
font(self) QFont
fontInfo(self) QFontInfo
fontMetrics(self) QFontMetrics
foregroundRole(self) QPalette.ColorRole
frameGeometry(self) QRect
frameSize(self) QSize
geometry(self) QRect
getSettings(**kwargs)

Get the current filter settings.

Returns

Map of the current filter settings

Return type

dict

grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) QPixmap
grabGesture(self, type: Qt.GestureType, flags: Qt.GestureFlag = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)
grabMouse(self, a0: Union[QCursor, Qt.CursorShape]) None
grabShortcut(self, key: Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) int
graphicsEffect(self) QGraphicsEffect
graphicsProxyWidget(self) QGraphicsProxyWidget
group(self) QButtonGroup
hasFocus(self) bool
hasHeightForWidth(self) bool
hasMouseTracking(self) bool
hasTabletTracking(self) bool
height(self) int
heightForWidth(self, a0: int) int
heightMM(self) int
hide(self)
hideEvent(self, a0: QHideEvent)
hitButton(self, pos: QPoint) bool
icon(self) QIcon
iconSize(self) QSize
inherits(self, classname: str) bool
initPainter(self, painter: QPainter)
initStyleOption(self, option: QStyleOptionToolButton)
inputMethodEvent(self, a0: QInputMethodEvent)
inputMethodHints(self) Qt.InputMethodHint
inputMethodQuery(self, a0: Qt.InputMethodQuery) Any
insertAction(self, before: QAction, action: QAction)
insertActions(self, before: QAction, actions: Iterable[QAction])
installEventFilter(self, a0: QObject)
isActiveWindow(self) bool
isAncestorOf(self, child: QWidget) bool
isCheckable(self) bool
isChecked(self) bool
isDown(self) bool
isEnabled(self) bool
isEnabledTo(self, a0: QWidget) bool
isFullScreen(self) bool
isHidden(self) bool
isItemHidden(item_txt)

Return whether the specified item text is hidden.

Parameters

item_txt (str) – Item text to check

Returns

True if item is n list and is hidden, False otherwise

Return type

bool

isLeftToRight(self) bool
isMaximized(self) bool
isMinimized(self) bool
isModal(self) bool
isRightToLeft(self) bool
isSignalConnected(self, signal: QMetaMethod) bool
isVisible(self) bool
isVisibleTo(self, a0: QWidget) bool
isWidgetType(self) bool
isWindow(self) bool
isWindowModified(self) bool
isWindowType(self) bool
keyPressEvent(self, e: QKeyEvent)
keyReleaseEvent(self, e: QKeyEvent)
keyboardGrabber() QWidget
killTimer(self, id: int)
layout(self) QLayout
layoutDirection(self) Qt.LayoutDirection
leaveEvent(self, a0: QEvent)
locale(self) QLocale
logicalDpiX(self) int
logicalDpiY(self) int
lower(self)
mapFrom(self, a0: QWidget, a1: QPoint) QPoint
mapFrom(self, a0: QWidget, a1: QPointF) QPointF
mapFromGlobal(self, a0: QPoint) QPoint
mapFromGlobal(self, a0: QPointF) QPointF
mapFromParent(self, a0: QPoint) QPoint
mapFromParent(self, a0: QPointF) QPointF
mapTo(self, a0: QWidget, a1: QPoint) QPoint
mapTo(self, a0: QWidget, a1: QPointF) QPointF
mapToGlobal(self, a0: QPoint) QPoint
mapToGlobal(self, a0: QPointF) QPointF
mapToParent(self, a0: QPoint) QPoint
mapToParent(self, a0: QPointF) QPointF
mask(self) QRegion
maximumHeight(self) int
maximumSize(self) QSize
maximumWidth(self) int
menu(self) QMenu
metaObject(self) QMetaObject
metric(self, a0: QPaintDevice.PaintDeviceMetric) int
minimumHeight(self) int
minimumSize(self) QSize
minimumSizeHint(self) QSize
minimumWidth(self) int
mouseDoubleClickEvent(self, a0: QMouseEvent)
mouseGrabber() QWidget
mouseMoveEvent(self, e: QMouseEvent)
mousePressEvent(self, a0: QMouseEvent)
mouseReleaseEvent(self, a0: QMouseEvent)
move(self, a0: QPoint)
move(self, ax: int, ay: int) None
moveEvent(event)

Update the pop up position and size when the widget is moved

moveToThread(self, thread: QThread)
nativeEvent(self, eventType: QByteArray, message: PyQt6.sip.voidptr) Tuple[bool, PyQt6.sip.voidptr]
nativeParentWidget(self) QWidget
nextCheckState(self)
nextInFocusChain(self) QWidget
normalGeometry(self) QRect
objectName(self) str
objectNameChanged

objectNameChanged(self, objectName: str) [signal]

onClicked()

If the button is clicked, toggle the check state of the button, which should toggle the visibility of the pop up.

overrideWindowFlags(self, type: Qt.WindowType)
overrideWindowState(self, state: Qt.WindowState)
paintEngine(self) QPaintEngine
paintEvent(self, a0: QPaintEvent)
paintingActive(self) bool
palette(self) QPalette
parent(self) QObject
parentWidget(self) QWidget
physicalDpiX(self) int
physicalDpiY(self) int
popUpClosing
popUpUpdated(text)

Whenever the pop up emits the dataChanged signal, update the widget. This function should be implemented in subclasses if required.

Parameters

text (str) – The text emitted with the dataChanged signal

property pop_up_visible
Returns

whether the pop up frame is visible to its parent

Return type

bool

popupMode(self) QToolButton.ToolButtonPopupMode
pos(self) QPoint
pressed

pressed(self) [signal]

previousInFocusChain(self) QWidget
property(self, name: str) Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, signal: PYQT_SIGNAL) int
rect(self) QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, id: int)
released

released(self) [signal]

removeAction(self, action: QAction)
removeEventFilter(self, a0: QObject)
render(self, target: QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))
render(self, painter: QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren)) None
repaint(self)
repaint(self, x: int, y: int, w: int, h: int) None
repaint(self, a0: QRect) None
repaint(self, a0: QRegion) None
resize(self, a0: QSize)
resize(self, w: int, h: int) None
resizeEvent(event)

Update the pop up position and size when the widget is resized

restoreGeometry(self, geometry: QByteArray) bool
saveGeometry(self) QByteArray
screen(self) QScreen
scroll(self, dx: int, dy: int)
scroll(self, dx: int, dy: int, a2: QRect) None
sender(self) QObject
senderSignalIndex(self) int
setAcceptDrops(self, on: bool)
setAccessibleDescription(self, description: str)
setAccessibleName(self, name: str)
setArrowType(self, type: Qt.ArrowType)
setAttribute(self, attribute: Qt.WidgetAttribute, on: bool = True)
setAutoExclusive(self, a0: bool)
setAutoFillBackground(self, enabled: bool)
setAutoRaise(self, enable: bool)
setAutoRepeat(self, a0: bool)
setAutoRepeatDelay(self, a0: int)
setAutoRepeatInterval(self, a0: int)
setBackgroundRole(self, a0: QPalette.ColorRole)
setBaseSize(self, basew: int, baseh: int)
setBaseSize(self, s: QSize) None
setCheckable(self, a0: bool)
setChecked(checked)

Set the button check state, and also alter the pop up visibility. Note that the button should be checked if and only if the pop up is visible, and that changing the visibility of the pop up (e.g. by clicking the button) will also change the check state. :param checked: whether the button should be checked :type checked: bool

setContentsMargins(self, left: int, top: int, right: int, bottom: int)
setContentsMargins(self, margins: QMargins) None
setContextMenuPolicy(self, policy: Qt.ContextMenuPolicy)
setCursor(self, a0: Union[QCursor, Qt.CursorShape])
setDefaultAction(self, a0: QAction)
setDisabled(self, a0: bool)
setDown(self, a0: bool)
setEnabled(self, a0: bool)
setFixedHeight(self, h: int)
setFixedSize(self, a0: QSize)
setFixedSize(self, w: int, h: int) None
setFixedWidth(self, w: int)
setFocus(self)
setFocus(self, reason: Qt.FocusReason) None
setFocusPolicy(self, policy: Qt.FocusPolicy)
setFocusProxy(self, a0: QWidget)
setFont(self, a0: QFont)
setForegroundRole(self, a0: QPalette.ColorRole)
setGeometry(self, a0: QRect)
setGeometry(self, ax: int, ay: int, aw: int, ah: int) None
setGraphicsEffect(self, effect: QGraphicsEffect)
setHidden(self, hidden: bool)
setIcon(self, icon: QIcon)
setIconSize(self, size: QSize)
setInputMethodHints(self, hints: Qt.InputMethodHint)
setLayout(self, a0: QLayout)
setLayoutDirection(self, direction: Qt.LayoutDirection)
setLocale(self, locale: QLocale)
setMask(self, a0: QBitmap)
setMask(self, a0: QRegion) None
setMaximumHeight(self, maxh: int)
setMaximumSize(self, maxw: int, maxh: int)
setMaximumSize(self, s: QSize) None
setMaximumWidth(self, maxw: int)
setMenu(self, menu: QMenu)
setMinimumHeight(self, minh: int)
setMinimumSize(self, minw: int, minh: int)
setMinimumSize(self, s: QSize) None
setMinimumWidth(self, minw: int)
setMouseTracking(self, enable: bool)
setObjectName(self, name: str)
setPalette(self, a0: QPalette)
setParent(self, parent: QWidget)
setParent(self, parent: QWidget, f: Qt.WindowType) None
setPopUp(pop_up)

Set the pop up widget to the specified pop up widget instance.

setPopUpClass(pop_up_class)

If a pop up class was not specified via the constructor, use this method to set it after the fact. Useful for placing widgets into *.ui files.

setPopupHalign(popup_halign)

Specify whether the pop up should have its right edge aligned with the right edge of the widget (ALIGN_RIGHT), have its left edge aligned with the left edge of the widget (ALIGN_LEFT), or have it’s horizontal alignment determined automatically (ALIGN_AUTO). Note that this setting is moot if the widget is wider than the pop up’s size hint, as the pop up will be extended to the same width as the widget.

Parameters

popup_halign (int) – The desired horizontal alignment of the pop up. Must be one of ALIGN_RIGHT, ALIGN_LEFT, or ALIGN_AUTO.

setPopupMode(self, mode: QToolButton.ToolButtonPopupMode)
setPopupValign(popup_valign)

Specify whether the pop up should appear above (ALIGN_TOP), below (ALIGN_BOTTOM) the widget, or have it’s vertical alignment determined automatically (ALIGN_AUTO).

Parameters

popup_valign (int) – The desired vertical alignment of the pop up. Must be either ALIGN_TOP, ALIGN_BOTTOM, or ALIGN_AUTO.

setProperty(self, name: str, value: Any) bool
setScreen(self, a0: QScreen)
setShortcut(self, key: Union[QKeySequence, QKeySequence.StandardKey, str, int])
setShortcutAutoRepeat(self, id: int, enabled: bool = True)
setShortcutEnabled(self, id: int, enabled: bool = True)
setSizeIncrement(self, w: int, h: int)
setSizeIncrement(self, s: QSize) None
setSizePolicy(self, a0: QSizePolicy)
setSizePolicy(self, hor: QSizePolicy.Policy, ver: QSizePolicy.Policy) None
setStatusTip(self, a0: str)
setStyle(self, a0: QStyle)
setStyleSheet(self, styleSheet: str)
setTabOrder(a0: QWidget, a1: QWidget)
setTabletTracking(self, enable: bool)
setText(self, text: str)
setToolButtonStyle(self, style: Qt.ToolButtonStyle)
setToolTip(self, a0: str)
setToolTipDuration(self, msec: int)
setUpdatesEnabled(self, enable: bool)
setVisible(self, visible: bool)
setWhatsThis(self, a0: str)
setWindowFilePath(self, filePath: str)
setWindowFlag(self, a0: Qt.WindowType, on: bool = True)
setWindowFlags(self, type: Qt.WindowType)
setWindowIcon(self, icon: QIcon)
setWindowIconText(self, a0: str)
setWindowModality(self, windowModality: Qt.WindowModality)
setWindowModified(self, a0: bool)
setWindowOpacity(self, level: float)
setWindowRole(self, a0: str)
setWindowState(self, state: Qt.WindowState)
setWindowTitle(self, a0: str)
sharedPainter(self) QPainter
shortcut(self) QKeySequence
show(self)
showEvent(self, a0: QShowEvent)
showFullScreen(self)
showMaximized(self)
showMenu(self)
showMinimized(self)
showNormal(self)
signalsBlocked(self) bool
size(self) QSize
sizeHint(self) QSize
sizeIncrement(self) QSize
sizePolicy(self) QSizePolicy
stackUnder(self, a0: QWidget)
startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) int
staticMetaObject = <PyQt6.QtCore.QMetaObject object>
statusTip(self) str
style(self) QStyle
styleSheet(self) str
tabletEvent(self, a0: QTabletEvent)
testAttribute(self, attribute: Qt.WidgetAttribute) bool
text(self) str
thread(self) QThread
timerEvent(self, a0: QTimerEvent)
toggle(self)
toggled

toggled(self, checked: bool) [signal]

toolButtonStyle(self) Qt.ToolButtonStyle
toolTip(self) str
toolTipDuration(self) int
tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) str
triggered

triggered(self, a0: QAction) [signal]

underMouse(self) bool
ungrabGesture(self, type: Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)
update(self, a0: QRect) None
update(self, a0: QRegion) None
update(self, ax: int, ay: int, aw: int, ah: int) None
updateGeometry(self)
updateMicroFocus(self, query: Qt.InputMethodQuery = Qt.ImQueryAll)
updatesEnabled(self) bool
visibleRegion(self) QRegion
whatsThis(self) str
wheelEvent(self, a0: QWheelEvent)
width(self) int
widthMM(self) int
winId(self) PyQt6.sip.voidptr
window(self) QWidget
windowFilePath(self) str
windowFlags(self) Qt.WindowType
windowHandle(self) QWindow
windowIcon(self) QIcon
windowIconChanged

windowIconChanged(self, icon: QIcon) [signal]

windowIconText(self) str
windowIconTextChanged

windowIconTextChanged(self, iconText: str) [signal]

windowModality(self) Qt.WindowModality
windowOpacity(self) float
windowRole(self) str
windowState(self) Qt.WindowState
windowTitle(self) str
windowTitleChanged

windowTitleChanged(self, title: str) [signal]

windowType(self) Qt.WindowType
x(self) int
y(self) int
class schrodinger.application.jaguar.gui.basis_selector.FilterBasisSelectorReadOnlyLineEdit(parent)

Bases: schrodinger.ui.qt.pop_up_widgets.LineEditWithPopUp

A read-only line edit used as an editor for table models with a BasisSelectorFilterPopUp.

Variables

filtersChanged – Signal emitted when filters are toggled. emits a dict of current filter settings.

filtersChanged
__init__(parent)
Parameters
  • parent (PyQt5.QtWidgets.QWidget) – The Qt parent widget

  • pop_up_class (type) – The class of the pop up widget. Should be a subclass of PopUp.

setStructure(struc)

Set the structure to use for determining basis set information and availability

Parameters

struc (schrodinger.structure.Structure) – The structure to use

setAtomNum(atom_num)

Set the atom number. The basis selector will now allow the user to select a basis set for the specified atom rather than for the entire structure. Note that this function will clear any per-atom basis sets that have been set via setPerAtom.

Parameters

atom_num (int) – The atom index

setPerAtom(per_atom)

Set the atom number. The basis selector will now allow the user to select a basis set for the specified atom rather than for the entire structure. Note that this function will clear any per-atom basis sets that have been set via setPerAtom.

Parameters

atom_num (int) – The atom index

setBasis(basis_full=None)

Set the basis to the requested value.

Parameters

basis_full (str or NoneType) – The requested basis. Note that this name may include *’s and +’s.

Raises

ValueError – If the requested basis was not valid. In these cases, the basis set will not be changed.

popUpUpdated()

Update the text edit’s basis based on the value in the pop up.

applySettings(settings)

Apply the specified filter settings to the pop up.

Parameters

settings (dict) – Filter settings to apply

ALIGN_AUTO = 4
ALIGN_BOTTOM = 1
ALIGN_LEFT = 3
ALIGN_RIGHT = 2
ALIGN_TOP = 0
class ActionPosition(value)

Bases: enum.Enum

An enumeration.

LeadingPosition = 0
TrailingPosition = 1
DrawChildren = 2
DrawWindowBackground = 1
class EchoMode(value)

Bases: enum.Enum

An enumeration.

Normal = 0
NoEcho = 1
Password = 2
PasswordEchoOnEdit = 3
IgnoreMask = 4
LeadingPosition = 0
NoEcho = 1
Normal = 0
class PaintDeviceMetric(value)

Bases: enum.Enum

An enumeration.

PdmWidth = 1
PdmHeight = 2
PdmWidthMM = 3
PdmHeightMM = 4
PdmNumColors = 5
PdmDepth = 6
PdmDpiX = 7
PdmDpiY = 8
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
Password = 2
PasswordEchoOnEdit = 3
PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag(value)

Bases: enum.Flag

An enumeration.

DrawWindowBackground = 1
DrawChildren = 2
IgnoreMask = 4
TrailingPosition = 1
acceptDrops(self) bool
accessibleDescription(self) str
accessibleName(self) str
actionEvent(self, a0: QActionEvent)
actions(self) List[QAction]
activateWindow(self)
addAction(self, a0: QAction)
addAction(self, action: QAction, position: QLineEdit.ActionPosition) None
addAction(self, icon: QIcon, position: QLineEdit.ActionPosition) QAction
addActions(self, actions: Iterable[QAction])
adjustSize(self)
alignment(self) Qt.AlignmentFlag
autoFillBackground(self) bool
backgroundRole(self) QPalette.ColorRole
backspace(self)
baseSize(self) QSize
blockSignals(self, b: bool) bool
changeEvent(self, a0: QEvent)
childAt(self, p: QPoint) QWidget
childAt(self, ax: int, ay: int) QWidget
childEvent(self, a0: QChildEvent)
children(self) List[QObject]
childrenRect(self) QRect
childrenRegion(self) QRegion
clear(self)
clearFocus(self)
clearMask(self)
close(self) bool
closeEvent(self, a0: QCloseEvent)
colorCount(self) int
completer(self) QCompleter
connectNotify(self, signal: QMetaMethod)
contentsMargins(self) QMargins
contentsRect(self) QRect
contextMenuEvent(self, a0: QContextMenuEvent)
contextMenuPolicy(self) Qt.ContextMenuPolicy
copy(self)
create(self, window: PyQt6.sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createStandardContextMenu(self) QMenu
createWindowContainer(window: QWindow, parent: typing.Optional[QWidget] = None, flags: Qt.WindowType = Qt.WindowFlags()) QWidget
cursor(self) QCursor
cursorBackward(self, mark: bool, steps: int = 1)
cursorForward(self, mark: bool, steps: int = 1)
cursorMoveStyle(self) Qt.CursorMoveStyle
cursorPosition(self) int
cursorPositionAt(self, pos: QPoint) int
cursorPositionChanged

cursorPositionChanged(self, a0: int, a1: int) [signal]

cursorRect(self) QRect
cursorWordBackward(self, mark: bool)
cursorWordForward(self, mark: bool)
customContextMenuRequested

customContextMenuRequested(self, pos: QPoint) [signal]

customEvent(self, a0: QEvent)
cut(self)
del_(self)
deleteLater(self)
depth(self) int
deselect(self)
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

devType(self) int
devicePixelRatio(self) float
devicePixelRatioF(self) float
devicePixelRatioFScale() float
disconnect(a0: QMetaObject.Connection) bool
disconnect(self) None
disconnectNotify(self, signal: QMetaMethod)
displayText(self) str
dragEnabled(self) bool
dragEnterEvent(self, a0: QDragEnterEvent)
dragLeaveEvent(self, e: QDragLeaveEvent)
dragMoveEvent(self, e: QDragMoveEvent)
dropEvent(self, a0: QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) List[QByteArray]
echoMode(self) QLineEdit.EchoMode
editingFinished

editingFinished(self) [signal]

effectiveWinId(self) PyQt6.sip.voidptr
end(self, mark: bool)
ensurePolished(self)
enterEvent(self, event: QEnterEvent)
event(self, a0: QEvent) bool
eventFilter(self, a0: QObject, a1: QEvent) bool
find(a0: PyQt6.sip.voidptr) QWidget
findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
focusInEvent(event)

When the line edit receives focus, show the pop up

focusNextChild(self) bool
focusNextPrevChild(self, next: bool) bool
focusOutEvent(self, a0: QFocusEvent)
focusPolicy(self) Qt.FocusPolicy
focusPreviousChild(self) bool
focusProxy(self) QWidget
focusWidget(self) QWidget
font(self) QFont
fontInfo(self) QFontInfo
fontMetrics(self) QFontMetrics
foregroundRole(self) QPalette.ColorRole
frameGeometry(self) QRect
frameSize(self) QSize
geometry(self) QRect
grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) QPixmap
grabGesture(self, type: Qt.GestureType, flags: Qt.GestureFlag = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)
grabMouse(self, a0: Union[QCursor, Qt.CursorShape]) None
grabShortcut(self, key: Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) int
graphicsEffect(self) QGraphicsEffect
graphicsProxyWidget(self) QGraphicsProxyWidget
hasAcceptableInput(self) bool
hasFocus(self) bool
hasFrame(self) bool
hasHeightForWidth(self) bool
hasMouseTracking(self) bool
hasSelectedText(self) bool
hasTabletTracking(self) bool
height(self) int
heightForWidth(self, a0: int) int
heightMM(self) int
hide(self)
hideEvent(self, a0: QHideEvent)
home(self, mark: bool)
inherits(self, classname: str) bool
initPainter(self, painter: QPainter)
initStyleOption(self, option: QStyleOptionFrame)
inputMask(self) str
inputMethodEvent(self, a0: QInputMethodEvent)
inputMethodHints(self) Qt.InputMethodHint
inputMethodQuery(self, a0: Qt.InputMethodQuery) Any
inputMethodQuery(self, property: Qt.InputMethodQuery, argument: Any) Any
inputRejected

inputRejected(self) [signal]

insert(self, a0: str)
insertAction(self, before: QAction, action: QAction)
insertActions(self, before: QAction, actions: Iterable[QAction])
installEventFilter(self, a0: QObject)
isActiveWindow(self) bool
isAncestorOf(self, child: QWidget) bool
isClearButtonEnabled(self) bool
isEnabled(self) bool
isEnabledTo(self, a0: QWidget) bool
isFullScreen(self) bool
isHidden(self) bool
isLeftToRight(self) bool
isMaximized(self) bool
isMinimized(self) bool
isModal(self) bool
isModified(self) bool
isReadOnly(self) bool
isRedoAvailable(self) bool
isRightToLeft(self) bool
isSignalConnected(self, signal: QMetaMethod) bool
isUndoAvailable(self) bool
isVisible(self) bool
isVisibleTo(self, a0: QWidget) bool
isWidgetType(self) bool
isWindow(self) bool
isWindowModified(self) bool
isWindowType(self) bool
keyPressEvent(self, a0: QKeyEvent)
keyReleaseEvent(self, a0: QKeyEvent)
keyboardGrabber() QWidget
killTimer(self, id: int)
layout(self) QLayout
layoutDirection(self) Qt.LayoutDirection
leaveEvent(self, a0: QEvent)
locale(self) QLocale
logicalDpiX(self) int
logicalDpiY(self) int
lower(self)
mapFrom(self, a0: QWidget, a1: QPoint) QPoint
mapFrom(self, a0: QWidget, a1: QPointF) QPointF
mapFromGlobal(self, a0: QPoint) QPoint
mapFromGlobal(self, a0: QPointF) QPointF
mapFromParent(self, a0: QPoint) QPoint
mapFromParent(self, a0: QPointF) QPointF
mapTo(self, a0: QWidget, a1: QPoint) QPoint
mapTo(self, a0: QWidget, a1: QPointF) QPointF
mapToGlobal(self, a0: QPoint) QPoint
mapToGlobal(self, a0: QPointF) QPointF
mapToParent(self, a0: QPoint) QPoint
mapToParent(self, a0: QPointF) QPointF
mask(self) QRegion
maxLength(self) int
maximumHeight(self) int
maximumSize(self) QSize
maximumWidth(self) int
metaObject(self) QMetaObject
metric(self, a0: QPaintDevice.PaintDeviceMetric) int
minimumHeight(self) int
minimumSize(self) QSize
minimumSizeHint(self) QSize
minimumWidth(self) int
mouseDoubleClickEvent(self, a0: QMouseEvent)
mouseGrabber() QWidget
mouseMoveEvent(self, a0: QMouseEvent)
mousePressEvent(event)

If the user clicks on the line edit and it already has focus, show the pop up again (in case the user hid it with a key press)

mouseReleaseEvent(self, a0: QMouseEvent)
move(self, a0: QPoint)
move(self, ax: int, ay: int) None
moveEvent(event)

Update the pop up position and size when the widget is moved

moveToThread(self, thread: QThread)
nativeEvent(self, eventType: QByteArray, message: PyQt6.sip.voidptr) Tuple[bool, PyQt6.sip.voidptr]
nativeParentWidget(self) QWidget
nextInFocusChain(self) QWidget
normalGeometry(self) QRect
objectName(self) str
objectNameChanged

objectNameChanged(self, objectName: str) [signal]

overrideWindowFlags(self, type: Qt.WindowType)
overrideWindowState(self, state: Qt.WindowState)
paintEngine(self) QPaintEngine
paintEvent(self, a0: QPaintEvent)
paintingActive(self) bool
palette(self) QPalette
parent(self) QObject
parentWidget(self) QWidget
paste(self)
physicalDpiX(self) int
physicalDpiY(self) int
placeholderText(self) str
popUpClosing
pos(self) QPoint
previousInFocusChain(self) QWidget
property(self, name: str) Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

raise_(self)
receivers(self, signal: PYQT_SIGNAL) int
rect(self) QRect
redo(self)
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, id: int)
removeAction(self, action: QAction)
removeEventFilter(self, a0: QObject)
render(self, target: QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))
render(self, painter: QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren)) None
repaint(self)
repaint(self, x: int, y: int, w: int, h: int) None
repaint(self, a0: QRect) None
repaint(self, a0: QRegion) None
resize(self, a0: QSize)
resize(self, w: int, h: int) None
resizeEvent(event)

Update the pop up position and size when the widget is resized

restoreGeometry(self, geometry: QByteArray) bool
returnPressed

returnPressed(self) [signal]

saveGeometry(self) QByteArray
screen(self) QScreen
scroll(self, dx: int, dy: int)
scroll(self, dx: int, dy: int, a2: QRect) None
selectAll(self)
selectedText(self) str
selectionChanged

selectionChanged(self) [signal]

selectionEnd(self) int
selectionLength(self) int
selectionStart(self) int
sender(self) QObject
senderSignalIndex(self) int
setAcceptDrops(self, on: bool)
setAccessibleDescription(self, description: str)
setAccessibleName(self, name: str)
setAlignment(self, flag: Qt.AlignmentFlag)
setAttribute(self, attribute: Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, enabled: bool)
setBackgroundRole(self, a0: QPalette.ColorRole)
setBaseSize(self, basew: int, baseh: int)
setBaseSize(self, s: QSize) None
setClearButtonEnabled(self, enable: bool)
setCompleter(self, completer: QCompleter)
setContentsMargins(self, left: int, top: int, right: int, bottom: int)
setContentsMargins(self, margins: QMargins) None
setContextMenuPolicy(self, policy: Qt.ContextMenuPolicy)
setCursor(self, a0: Union[QCursor, Qt.CursorShape])
setCursorMoveStyle(self, style: Qt.CursorMoveStyle)
setCursorPosition(self, a0: int)
setDisabled(self, a0: bool)
setDragEnabled(self, b: bool)
setEchoMode(self, a0: QLineEdit.EchoMode)
setEnabled(self, a0: bool)
setFixedHeight(self, h: int)
setFixedSize(self, a0: QSize)
setFixedSize(self, w: int, h: int) None
setFixedWidth(self, w: int)
setFocus(self)
setFocus(self, reason: Qt.FocusReason) None
setFocusPolicy(self, policy: Qt.FocusPolicy)
setFocusProxy(self, a0: QWidget)
setFont(self, a0: QFont)
setForegroundRole(self, a0: QPalette.ColorRole)
setFrame(self, a0: bool)
setGeometry(self, a0: QRect)
setGeometry(self, ax: int, ay: int, aw: int, ah: int) None
setGraphicsEffect(self, effect: QGraphicsEffect)
setHidden(self, hidden: bool)
setInputMask(self, inputMask: str)
setInputMethodHints(self, hints: Qt.InputMethodHint)
setLayout(self, a0: QLayout)
setLayoutDirection(self, direction: Qt.LayoutDirection)
setLocale(self, locale: QLocale)
setMask(self, a0: QBitmap)
setMask(self, a0: QRegion) None
setMaxLength(self, a0: int)
setMaximumHeight(self, maxh: int)
setMaximumSize(self, maxw: int, maxh: int)
setMaximumSize(self, s: QSize) None
setMaximumWidth(self, maxw: int)
setMinimumHeight(self, minh: int)
setMinimumSize(self, minw: int, minh: int)
setMinimumSize(self, s: QSize) None
setMinimumWidth(self, minw: int)
setModified(self, a0: bool)
setMouseTracking(self, enable: bool)
setObjectName(self, name: str)
setPalette(self, a0: QPalette)
setParent(self, parent: QWidget)
setParent(self, parent: QWidget, f: Qt.WindowType) None
setPlaceholderText(self, a0: str)
setPopUp(pop_up)

Set the pop up widget to the specified pop up widget instance.

setPopUpClass(pop_up_class)

If a pop up class was not specified via the constructor, use this method to set it after the fact. Useful for placing widgets into *.ui files.

setPopupHalign(popup_halign)

Specify whether the pop up should have its right edge aligned with the right edge of the widget (ALIGN_RIGHT), have its left edge aligned with the left edge of the widget (ALIGN_LEFT), or have it’s horizontal alignment determined automatically (ALIGN_AUTO). Note that this setting is moot if the widget is wider than the pop up’s size hint, as the pop up will be extended to the same width as the widget.

Parameters

popup_halign (int) – The desired horizontal alignment of the pop up. Must be one of ALIGN_RIGHT, ALIGN_LEFT, or ALIGN_AUTO.

setPopupValign(popup_valign)

Specify whether the pop up should appear above (ALIGN_TOP), below (ALIGN_BOTTOM) the widget, or have it’s vertical alignment determined automatically (ALIGN_AUTO).

Parameters

popup_valign (int) – The desired vertical alignment of the pop up. Must be either ALIGN_TOP, ALIGN_BOTTOM, or ALIGN_AUTO.

setProperty(self, name: str, value: Any) bool
setReadOnly(self, a0: bool)
setScreen(self, a0: QScreen)
setSelection(self, a0: int, a1: int)
setShortcutAutoRepeat(self, id: int, enabled: bool = True)
setShortcutEnabled(self, id: int, enabled: bool = True)
setSizeIncrement(self, w: int, h: int)
setSizeIncrement(self, s: QSize) None
setSizePolicy(self, a0: QSizePolicy)
setSizePolicy(self, hor: QSizePolicy.Policy, ver: QSizePolicy.Policy) None
setStatusTip(self, a0: str)
setStyle(self, a0: QStyle)
setStyleSheet(self, styleSheet: str)
setTabOrder(a0: QWidget, a1: QWidget)
setTabletTracking(self, enable: bool)
setText(self, a0: str)
setTextMargins(self, left: int, top: int, right: int, bottom: int)
setTextMargins(self, margins: QMargins) None
setToolTip(self, a0: str)
setToolTipDuration(self, msec: int)
setUpdatesEnabled(self, enable: bool)
setValidator(self, a0: QValidator)
setVisible(self, visible: bool)
setWhatsThis(self, a0: str)
setWindowFilePath(self, filePath: str)
setWindowFlag(self, a0: Qt.WindowType, on: bool = True)
setWindowFlags(self, type: Qt.WindowType)
setWindowIcon(self, icon: QIcon)
setWindowIconText(self, a0: str)
setWindowModality(self, windowModality: Qt.WindowModality)
setWindowModified(self, a0: bool)
setWindowOpacity(self, level: float)
setWindowRole(self, a0: str)
setWindowState(self, state: Qt.WindowState)
setWindowTitle(self, a0: str)
sharedPainter(self) QPainter
show(self)
showEvent(event)

Update the pop up position and size when the widget is shown

showFullScreen(self)
showMaximized(self)
showMinimized(self)
showNormal(self)
signalsBlocked(self) bool
size(self) QSize
sizeHint(self) QSize
sizeIncrement(self) QSize
sizePolicy(self) QSizePolicy
stackUnder(self, a0: QWidget)
startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) int
staticMetaObject = <PyQt6.QtCore.QMetaObject object>
statusTip(self) str
style(self) QStyle
styleSheet(self) str
tabletEvent(self, a0: QTabletEvent)
testAttribute(self, attribute: Qt.WidgetAttribute) bool
text(self) str
textChanged

textChanged(self, a0: str) [signal]

textEdited

textEdited(self, a0: str) [signal]

textMargins(self) QMargins
textUpdated(text)

Whenever the text in the line edit is changed, show the pop up and call PopUp.lineEditUpdated. The default implementation prevents the PopUp from sending signals during the execution of PopUp.lineEditUpdated. This prevents an infinite loop of PopUp.lineEditUpdated and LineEditWithPopUp.popUpUpdated.

Parameters

text (str) – The current text in the line edit

thread(self) QThread
timerEvent(self, a0: QTimerEvent)
toolTip(self) str
toolTipDuration(self) int
tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) str
underMouse(self) bool
undo(self)
ungrabGesture(self, type: Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)
update(self, a0: QRect) None
update(self, a0: QRegion) None
update(self, ax: int, ay: int, aw: int, ah: int) None
updateGeometry(self)
updateMicroFocus(self, query: Qt.InputMethodQuery = Qt.ImQueryAll)
updatesEnabled(self) bool
validator(self) QValidator
visibleRegion(self) QRegion
whatsThis(self) str
wheelEvent(self, a0: QWheelEvent)
width(self) int
widthMM(self) int
winId(self) PyQt6.sip.voidptr
window(self) QWidget
windowFilePath(self) str
windowFlags(self) Qt.WindowType
windowHandle(self) QWindow
windowIcon(self) QIcon
windowIconChanged

windowIconChanged(self, icon: QIcon) [signal]

windowIconText(self) str
windowIconTextChanged

windowIconTextChanged(self, iconText: str) [signal]

windowModality(self) Qt.WindowModality
windowOpacity(self) float
windowRole(self) str
windowState(self) Qt.WindowState
windowTitle(self) str
windowTitleChanged

windowTitleChanged(self, title: str) [signal]

windowType(self) Qt.WindowType
x(self) int
y(self) int