schrodinger.ui.qt.appframework2.wizards module

schrodinger.ui.qt.appframework2.wizards.Actions

alias of schrodinger.ui.qt.appframework2.wizards.Action

class schrodinger.ui.qt.appframework2.wizards.BaseWizardPanel(*args, **kwargs)

Bases: schrodinger.ui.qt.appframework2.settings.SettingsPanelMixin, schrodinger.ui.qt.basewidgets.BaseWidget

finished
initSetOptions()

Suggested subclass use: set instance variables, excluding layouts and subwidgets. Also use here to (optionally) apply the legacy stylesheet spacing settings (PANEL-19101).

initSetUp()

Creates widget from ui and stores it ui_widget.

Suggested subclass use: create and initialize subwidgets, and connect signals.

initLayOut()

Create a vertical layout for the widget (widget_layout) and populate it with two vertical sub-layouts: main_layout and bottom_layout.

If the user has specified the ui data member, insert the resultant ui_widget into main_layout.

If the widget already has a layout defined, this method will produce a warning (but not a traceback). main_layout and bottom_layout will be inserted into the existing widget layout, which will not be the same as widget_layout. It is therefore recommended that this mixin is used only with widgets that do not already have a layout.

Suggested subclass use: create, initialize, and populate layouts.

initSetDefaults()

Set widget to its default state. If the widget uses a model/mapper, it’s preferable to reset the widget state by resetting the model.

onBackClicked()
onNextClicked()
onCancelClicked()
run(prev_panel_state=None)

Runs the panel. If the panel is being invoked by clicking “Next” on the previous panel, pass in the previous panel’s state so it can be processed.

Parameters

prev_panel_state (settings.PanelState or None) – the previous panel’s state

closeEvent(event)

Ensures proper handling of OK, Cancel, and [X] button clicks

show()

Override the show method to clear and previous value of self.accepted

processPrevPanel(state)

Override this method to receive the settings from the previous panel and processes them appropriately.

Parameters

state (settings.PanelState) – the state from the previous panel

processBack()

Override this method to perform necessary actions when going back

processNext()

Override this method to perform necessary actions when going to next A return value of False will stay in the current panel, any other value will continue to the next.

APPLY_LEGACY_STYLESHEET = True
APPLY_PANELX_STYLESHEET = False
class BtnPos(value)

Bases: enum.IntEnum

An enumeration.

Left = 0
Middle = 1
Right = 2
DrawChildren = 2
DrawWindowBackground = 1
IgnoreMask = 4
class PaintDeviceMetric(value)

Bases: enum.Enum

An enumeration.

PdmWidth = 1
PdmHeight = 2
PdmWidthMM = 3
PdmHeightMM = 4
PdmNumColors = 5
PdmDepth = 6
PdmDpiX = 7
PdmDpiY = 8
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDepth = 6
PdmDevicePixelRatio = 11
PdmDevicePixelRatioScaled = 12
PdmDpiX = 7
PdmDpiY = 8
PdmHeight = 2
PdmHeightMM = 4
PdmNumColors = 5
PdmPhysicalDpiX = 9
PdmPhysicalDpiY = 10
PdmWidth = 1
PdmWidthMM = 3
class RenderFlag(value)

Bases: enum.Flag

An enumeration.

DrawWindowBackground = 1
DrawChildren = 2
IgnoreMask = 4
SHOW_AS_WINDOW = False
class StdBtn(value)

Bases: enum.IntEnum

An enumeration.

Ok = 0
Cancel = 1
Reset = 2
Help = 3
__init__(*args, **kwargs)
acceptDrops(self) bool
property accepted
accessibleDescription(self) str
accessibleName(self) str
actionEvent(self, a0: QActionEvent)
actions(self) List[QAction]
activateWindow(self)
addAction(self, action: QAction)
addActions(self, actions: Iterable[QAction])
adjustSize(self)
applyAliasedSettings(settings)

Applies any aliased settings with new values from the dictionary. Any aliases not present in the settings dictionary will be left unchanged.

Parameters

settings (dict) – a dictionary mapping aliases to new values to apply

applySettings(settings, target=None)
autoFillBackground(self) bool
backgroundRole(self) QPalette.ColorRole
baseSize(self) QSize
blockSignals(self, b: bool) bool
changeEvent(self, a0: QEvent)
childAt(self, p: QPoint) QWidget
childAt(self, ax: int, ay: int) QWidget
childEvent(self, a0: QChildEvent)
children(self) List[QObject]
childrenRect(self) QRect
childrenRegion(self) QRegion
clearFocus(self)
clearMask(self)
close(self) bool
colorCount(self) int
connectNotify(self, signal: QMetaMethod)
contentsMargins(self) QMargins
contentsRect(self) QRect
contextMenuEvent(self, a0: QContextMenuEvent)
contextMenuPolicy(self) Qt.ContextMenuPolicy
create(self, window: PyQt6.sip.voidptr = 0, initializeWindow: bool = True, destroyOldWindow: bool = True)
createWindowContainer(window: QWindow, parent: typing.Optional[QWidget] = None, flags: Qt.WindowType = Qt.WindowFlags()) QWidget
cursor(self) QCursor
customContextMenuRequested

customContextMenuRequested(self, pos: QPoint) [signal]

customEvent(self, a0: QEvent)
debug()
definePanelSettings()

Override this method to define the settings for the panel. The aliased settings provide an interface for saving/restoring panel state as well as for interacting with task/job runners that need to access the panel state in a way that is agnostic to the specifics of widget names and types.

Each panel setting is defined by a tuple that specifies the mapping of alias to panel setting. An optional third element in the tuple can be used to group settings by category. This allows multiple settings to share the same alias.

Each setting can either point to a specific object (usually a qt widget), or a pair of setter/getter functions.

If the mapped object is a string, this will be interpreted by af2 as referring to an attribute on the panel, and a AttributeSettingWrapper instance will automatically be created. For example, specifying the string ‘num_atoms’ will create a mapping to self.num_atoms which will simply get and set the value of that instance member.

Custom setter and getter functions should take the form getter(), returning a value that can be encoded/decoded by JSON, and setter(value), where the type of value is the same as the return type of the getter.

Commonly used objects/widgets should be handled automatically in settings.py. It’s worth considering whether it makes more sense to use a custom setter/getter here or add support for the widget in settings.py.

Returns

a list of tuples defining the custom settings.

Return type

list of tuples. Each tuple can be of type (str, object, str) or (str, (callable, callable), str) where the final str is optional.

Custom settings tuples consists of up to three elements:

  1. alias - a string identier for the setting. Ex. “box_centroid”

  2. either:

    1. an object of a type that is supported by settings.py or

    2. the string name of an existing panel attribute (i.e. member variable), or

    3. a (getter, setter) tuple. The getter should take no arguments, and the setter should take a single value.

  3. optionally, a group identifier. This can be useful if the panel runs two different jobs that both have a parameter with the same name but that needs to map to different widgets. If a setting has a group name, it will be ignored by runners unless the runner name matches the group name.

deleteLater(self)
depth(self) int
destroy(self, destroyWindow: bool = True, destroySubWindows: bool = True)
destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

devType(self) int
devicePixelRatio(self) float
devicePixelRatioF(self) float
devicePixelRatioFScale() float
disconnect(a0: QMetaObject.Connection) bool
disconnect(self) None
disconnectNotify(self, signal: QMetaMethod)
dragEnterEvent(self, a0: QDragEnterEvent)
dragLeaveEvent(self, a0: QDragLeaveEvent)
dragMoveEvent(self, a0: QDragMoveEvent)
dropEvent(self, a0: QDropEvent)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) List[QByteArray]
effectiveWinId(self) PyQt6.sip.voidptr
ensurePolished(self)
enterEvent(self, event: QEnterEvent)
error(*args, **kwargs)

Shows a popup error message box. For parameter documentation see messagebox.MessageBox.

event(self, a0: QEvent) bool
eventFilter(self, a0: QObject, a1: QEvent) bool
find(a0: PyQt6.sip.voidptr) QWidget
findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
focusInEvent(self, a0: QFocusEvent)
focusNextChild(self) bool
focusNextPrevChild(self, next: bool) bool
focusOutEvent(self, a0: QFocusEvent)
focusPolicy(self) Qt.FocusPolicy
focusPreviousChild(self) bool
focusProxy(self) QWidget
focusWidget(self) QWidget
font(self) QFont
fontInfo(self) QFontInfo
fontMetrics(self) QFontMetrics
foregroundRole(self) QPalette.ColorRole
forgetMessageBoxResponse(key)

Forgets any previously saved response that was stored via a save_response_key.

Parameters

key – the key for the response to forget

frameGeometry(self) QRect
frameSize(self) QSize
geometry(self) QRect
getAliasedSettings()
getAliasedValue(alias)
getObjValue(obj)
getPanelState()

Gets the current state of the panel in the form of a serializable dict. The state consists of the settings specified in definePanelSettings() as well as the automatically harvested settings.

getPersistenceKey(alias)

Return a unique identifier for saving/restoring a setting in the preferences. Override this method to change the key scheme (this is necessary if creating a common resource which is shared by multiple panels).

Parameters

alias (str) – the alias for which we are generating a key

getSettings(target=None, ignore_list=None)
grab(self, rectangle: QRect = QRect(QPoint(0, 0), QSize(- 1, - 1))) QPixmap
grabGesture(self, type: Qt.GestureType, flags: Qt.GestureFlag = Qt.GestureFlags())
grabKeyboard(self)
grabMouse(self)
grabMouse(self, a0: Union[QCursor, Qt.CursorShape]) None
grabShortcut(self, key: Union[QKeySequence, QKeySequence.StandardKey, str, int], context: Qt.ShortcutContext = Qt.WindowShortcut) int
graphicsEffect(self) QGraphicsEffect
graphicsProxyWidget(self) QGraphicsProxyWidget
hasFocus(self) bool
hasHeightForWidth(self) bool
hasMouseTracking(self) bool
hasTabletTracking(self) bool
height(self) int
heightForWidth(self, a0: int) int
heightMM(self) int
hide(self)
hideEvent(self, a0: QHideEvent)
info(*args, **kwargs)

Shows a popup information message box. For parameter documentation see messagebox.MessageBox.

inherits(self, classname: str) bool
initFinalize()

Suggested subclass use: perform any remaining initialization.

initPainter(self, painter: QPainter)
inputMethodEvent(self, a0: QInputMethodEvent)
inputMethodHints(self) Qt.InputMethodHint
inputMethodQuery(self, a0: Qt.InputMethodQuery) Any
insertAction(self, before: QAction, action: QAction)
insertActions(self, before: QAction, actions: Iterable[QAction])
installEventFilter(self, a0: QObject)
isActiveWindow(self) bool
isAncestorOf(self, child: QWidget) bool
isEnabled(self) bool
isEnabledTo(self, a0: QWidget) bool
isFullScreen(self) bool
isHidden(self) bool
isLeftToRight(self) bool
isMaximized(self) bool
isMinimized(self) bool
isModal(self) bool
isRightToLeft(self) bool
isSignalConnected(self, signal: QMetaMethod) bool
isVisible(self) bool
isVisibleTo(self, a0: QWidget) bool
isWidgetType(self) bool
isWindow(self) bool
isWindowModified(self) bool
isWindowType(self) bool
keyPressEvent(self, a0: QKeyEvent)
keyReleaseEvent(self, a0: QKeyEvent)
keyboardGrabber() QWidget
killTimer(self, id: int)
layout(self) QLayout
layoutDirection(self) Qt.LayoutDirection
leaveEvent(self, a0: QEvent)
loadPanelState(filename=None)

Load the panel state from a JSON file

Parameters

filename (str) – the JSON filename. Defaults to “panelstate.json”

loadPersistentOptions()

Load all persistent options from the preferences.

locale(self) QLocale
logicalDpiX(self) int
logicalDpiY(self) int
lower(self)
mapFrom(self, a0: QWidget, a1: QPoint) QPoint
mapFrom(self, a0: QWidget, a1: QPointF) QPointF
mapFromGlobal(self, a0: QPoint) QPoint
mapFromGlobal(self, a0: QPointF) QPointF
mapFromParent(self, a0: QPoint) QPoint
mapFromParent(self, a0: QPointF) QPointF
mapTo(self, a0: QWidget, a1: QPoint) QPoint
mapTo(self, a0: QWidget, a1: QPointF) QPointF
mapToGlobal(self, a0: QPoint) QPoint
mapToGlobal(self, a0: QPointF) QPointF
mapToParent(self, a0: QPoint) QPoint
mapToParent(self, a0: QPointF) QPointF
mask(self) QRegion
maximumHeight(self) int
maximumSize(self) QSize
maximumWidth(self) int
metaObject(self) QMetaObject
metric(self, a0: QPaintDevice.PaintDeviceMetric) int
minimumHeight(self) int
minimumSize(self) QSize
minimumSizeHint(self) QSize
minimumWidth(self) int
mouseDoubleClickEvent(self, a0: QMouseEvent)
mouseGrabber() QWidget
mouseMoveEvent(self, a0: QMouseEvent)
mousePressEvent(self, a0: QMouseEvent)
mouseReleaseEvent(self, a0: QMouseEvent)
move(self, a0: QPoint)
move(self, ax: int, ay: int) None
moveEvent(self, a0: QMoveEvent)
moveToThread(self, thread: QThread)
nativeEvent(self, eventType: QByteArray, message: PyQt6.sip.voidptr) Tuple[bool, PyQt6.sip.voidptr]
nativeParentWidget(self) QWidget
nextInFocusChain(self) QWidget
normalGeometry(self) QRect
objectName(self) str
objectNameChanged

objectNameChanged(self, objectName: str) [signal]

overrideWindowFlags(self, type: Qt.WindowType)
overrideWindowState(self, state: Qt.WindowState)
paintEngine(self) QPaintEngine
paintEvent(self, a0: QPaintEvent)
paintingActive(self) bool
palette(self) QPalette
parent(self) QObject
parentWidget(self) QWidget
physicalDpiX(self) int
physicalDpiY(self) int
pos(self) QPoint
previousInFocusChain(self) QWidget
property(self, name: str) Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

question(*args, **kwargs)

Shows a popup question message box. For parameter documentation see messagebox.QuestionMessageBox.

raise_(self)
receivers(self, signal: PYQT_SIGNAL) int
rect(self) QRect
releaseKeyboard(self)
releaseMouse(self)
releaseShortcut(self, id: int)
removeAction(self, action: QAction)
removeEventFilter(self, a0: QObject)
render(self, target: QPaintDevice, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren))
render(self, painter: QPainter, targetOffset: QPoint = QPoint(), sourceRegion: QRegion = QRegion(), flags: QWidget.RenderFlag = QWidget.RenderFlags(QWidget.DrawWindowBackground | QWidget.DrawChildren)) None
repaint(self)
repaint(self, x: int, y: int, w: int, h: int) None
repaint(self, a0: QRect) None
repaint(self, a0: QRegion) None
reportValidation(results)

Present validation messages to the user. This is an implmentation of the ValidationMixin interface and does not need to be called directly.

This method assumes that error and question methods have been defined in the subclass, as in e.g. widget_mixins.MessageBoxMixin.

Parameters

results (validation.ValidationResults) – Set of validation results generated by validate

Returns

if True, there were no validation errors and the user decided to continue despite any warnings. If False, there was at least one validation error or the user decided to abort when faced with a warning.

resize(self, a0: QSize)
resize(self, w: int, h: int) None
resizeEvent(self, a0: QResizeEvent)
restoreGeometry(self, geometry: QByteArray) bool
runValidation(silent=False, validate_children=True, stop_on_fail=True)

Runs validation and reports the results (unless run silently).

Parameters
  • silent (bool) – run without any reporting (i.e. error messages to the user). This is useful if we want to programmatically test validity. Changes return value of this method from ValidationResults to a boolean.

  • validate_children (bool) – run validation on all child objects. See _validateChildren for documentation on what this entails.

  • stop_on_fail (bool) – stop validation when first failure is encountered

Returns

if silent is False, returns the validation results. If silent is True, returns a boolean generated by reportValidation.

Return type

ValidationResults or bool

saveGeometry(self) QByteArray
savePersistentOptions()

Store all persistent options to the preferences.

screen(self) QScreen
scroll(self, dx: int, dy: int)
scroll(self, dx: int, dy: int, a2: QRect) None
sender(self) QObject
senderSignalIndex(self) int
setAcceptDrops(self, on: bool)
setAccessibleDescription(self, description: str)
setAccessibleName(self, name: str)
setAlias(alias, obj, persistent=False)

Sets an alias to conveniently access an object.

Parameters
  • alias (hashable) – any hashable, but typically a string name

  • obj (object) – the actual object to be referenced

  • persistent (bool) – whether to make the setting persistent

setAliasedValue(alias, value)
setAliases(alias_dict, persistent=False)

Sets multiple aliases at once. Already used aliases are overwritten; other existing aliases are not affected.

Parameters
  • alias_dict (dict) – map of aliases to objects

  • persistent (bool) – whether to make the settings persistent

setAttribute(self, attribute: Qt.WidgetAttribute, on: bool = True)
setAutoFillBackground(self, enabled: bool)
setBackgroundRole(self, a0: QPalette.ColorRole)
setBaseSize(self, basew: int, baseh: int)
setBaseSize(self, s: QSize) None
setContentsMargins(self, left: int, top: int, right: int, bottom: int)
setContentsMargins(self, margins: QMargins) None
setContextMenuPolicy(self, policy: Qt.ContextMenuPolicy)
setCursor(self, a0: Union[QCursor, Qt.CursorShape])
setDisabled(self, a0: bool)
setEnabled(self, a0: bool)
setFixedHeight(self, h: int)
setFixedSize(self, a0: QSize)
setFixedSize(self, w: int, h: int) None
setFixedWidth(self, w: int)
setFocus(self)
setFocus(self, reason: Qt.FocusReason) None
setFocusPolicy(self, policy: Qt.FocusPolicy)
setFocusProxy(self, a0: QWidget)
setFont(self, a0: QFont)
setForegroundRole(self, a0: QPalette.ColorRole)
setGeometry(self, a0: QRect)
setGeometry(self, ax: int, ay: int, aw: int, ah: int) None
setGraphicsEffect(self, effect: QGraphicsEffect)
setHidden(self, hidden: bool)
setInputMethodHints(self, hints: Qt.InputMethodHint)
setLayout(self, a0: QLayout)
setLayoutDirection(self, direction: Qt.LayoutDirection)
setLocale(self, locale: QLocale)
setMask(self, a0: QBitmap)
setMask(self, a0: QRegion) None
setMaximumHeight(self, maxh: int)
setMaximumSize(self, maxw: int, maxh: int)
setMaximumSize(self, s: QSize) None
setMaximumWidth(self, maxw: int)
setMinimumHeight(self, minh: int)
setMinimumSize(self, minw: int, minh: int)
setMinimumSize(self, s: QSize) None
setMinimumWidth(self, minw: int)
setMouseTracking(self, enable: bool)
setObjValue(obj, value)
setObjectName(self, name: str)
setPalette(self, a0: QPalette)
setPanelState(state)

Resets the panel and then sets the panel to the specified state

Parameters

state (PanelState) – the panel state to set. This object should originate from a call to getPanelState()

setParent(self, parent: QWidget)
setParent(self, parent: QWidget, f: Qt.WindowType) None
setPersistent(alias=None)

Set options to be persistent. Any options to be made persistent must be aliased, since the alias is used to form the preference key. If no alias is specified, all aliased settings will be made persistent.

Parameters

alias (str or None) – the alias to save, or None

setProperty(self, name: str, value: Any) bool
setScreen(self, a0: QScreen)
setShortcutAutoRepeat(self, id: int, enabled: bool = True)
setShortcutEnabled(self, id: int, enabled: bool = True)
setSizeIncrement(self, w: int, h: int)
setSizeIncrement(self, s: QSize) None
setSizePolicy(self, a0: QSizePolicy)
setSizePolicy(self, hor: QSizePolicy.Policy, ver: QSizePolicy.Policy) None
setStatusTip(self, a0: str)
setStyle(self, a0: QStyle)
setStyleSheet(self, styleSheet: str)
setTabOrder(a0: QWidget, a1: QWidget)
setTabletTracking(self, enable: bool)
setToolTip(self, a0: str)
setToolTipDuration(self, msec: int)
setUpdatesEnabled(self, enable: bool)
setVisible(self, visible: bool)
setWhatsThis(self, a0: str)
setWidgetLayout()

Set the widget layout

setWindowFilePath(self, filePath: str)
setWindowFlag(self, a0: Qt.WindowType, on: bool = True)
setWindowFlags(self, type: Qt.WindowType)
setWindowFlagsForRun()
setWindowIcon(self, icon: QIcon)
setWindowIconText(self, a0: str)
setWindowModality(self, windowModality: Qt.WindowModality)
setWindowModified(self, a0: bool)
setWindowOpacity(self, level: float)
setWindowRole(self, a0: str)
setWindowState(self, state: Qt.WindowState)
setWindowTitle(self, a0: str)
sharedPainter(self) QPainter
showEvent(self, a0: QShowEvent)
showFullScreen(self)
showMaximized(self)
showMessageBox(*args, **kwargs)

Shows a popup message box. For parameter documentation see messagebox.MessageBox.

showMinimized(self)
showNormal(self)
signalsBlocked(self) bool
size(self) QSize
sizeHint(self) QSize
sizeIncrement(self) QSize
sizePolicy(self) QSizePolicy
stackUnder(self, a0: QWidget)
startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) int
staticMetaObject = <PyQt6.QtCore.QMetaObject object>
statusTip(self) str
style(self) QStyle
styleSheet(self) str
tabletEvent(self, a0: QTabletEvent)
testAttribute(self, attribute: Qt.WidgetAttribute) bool
thread(self) QThread
timerEvent(self, a0: QTimerEvent)
toolTip(self) str
toolTipDuration(self) int
tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) str
ui_module = None
underMouse(self) bool
ungrabGesture(self, type: Qt.GestureType)
unsetCursor(self)
unsetLayoutDirection(self)
unsetLocale(self)
update(self)
update(self, a0: QRect) None
update(self, a0: QRegion) None
update(self, ax: int, ay: int, aw: int, ah: int) None
updateGeometry(self)
updateMicroFocus(self, query: Qt.InputMethodQuery = Qt.ImQueryAll)
updatesEnabled(self) bool
visibleRegion(self) QRegion
warning(*args, **kwargs)

Shows a popup warning message box. For parameter documentation see messagebox.MessageBox.

whatsThis(self) str
wheelEvent(self, a0: QWheelEvent)
width(self) int
widthMM(self) int
winId(self) PyQt6.sip.voidptr
window(self) QWidget
windowFilePath(self) str
windowFlags(self) Qt.WindowType
windowHandle(self) QWindow
windowIcon(self) QIcon
windowIconChanged

windowIconChanged(self, icon: QIcon) [signal]

windowIconText(self) str
windowIconTextChanged

windowIconTextChanged(self, iconText: str) [signal]

windowModality(self) Qt.WindowModality
windowOpacity(self) float
windowRole(self) str
windowState(self) Qt.WindowState
windowTitle(self) str
windowTitleChanged

windowTitleChanged(self, title: str) [signal]

windowType(self) Qt.WindowType
writePanelState(filename=None)

Write the panel state to a JSON file

Parameters

filename (str) – the JSON filename. Defaults to “panelstate.json”

x(self) int
y(self) int
class schrodinger.ui.qt.appframework2.wizards.MultiPanelWizard

Bases: PyQt6.QtCore.QObject

The MultiPanelWizard allows a series of BaseWizardPanel instances to be chained together to create a wizard. It manages navigation between the panels as well as passing information from one panel to the next.

This class can be instantiated and used directly, or it can be subclassed for more complex cases.

finished
classmethod panel(run=True)

Launch a singleton instance of this class. If the wizard has already been instantiated, the existing wizard instance will be re-opened and brought to the front.

Parameters

run (bool) – Whether to launch the panel

Returns

The singleton panel instance

Return type

MultiPanelWizard

__init__()
addPanel(panel)

Add a panel to the wizard. Panels are chained in the order they are added.

Parameters

panel (BaseWizardPanel) – the panel to be added to the wizard’s chain

run()

Run the wizard.

currentPanel()

Returns the current panel or None if the wizard has not been started.

runCurrentPanel()

Runs the current panel.

processPanel()

This method will get called whenever a panel is dismissed (via Next, Back, or Cancel) and depending on the action chosen, will update the current panel index to the appropriate value and run it or terminate the wizard.

quit()

Exit the wizard

setup()

If subclassing, override this method to add logic to be run during initialization, such as adding wizard panels.

startup()

If subclassing, override this method to add logic to be run right before starting the wizard.

postProcess()

If subclassing, override this method to add logic to be run after the wizard has run. This method will be called whether the user finishes the wizard or stops midway. To determine what to do, check the value of self.current_panel_index.

blockSignals(self, b: bool) bool
childEvent(self, a0: QChildEvent)
children(self) List[QObject]
connectNotify(self, signal: QMetaMethod)
customEvent(self, a0: QEvent)
deleteLater(self)
destroyed

destroyed(self, object: typing.Optional[QObject] = None) [signal]

disconnect(a0: QMetaObject.Connection) bool
disconnect(self) None
disconnectNotify(self, signal: QMetaMethod)
dumpObjectInfo(self)
dumpObjectTree(self)
dynamicPropertyNames(self) List[QByteArray]
event(self, a0: QEvent) bool
eventFilter(self, a0: QObject, a1: QEvent) bool
findChild(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChild(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) QObject
findChildren(self, type: type, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, name: str = '', options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, type: type, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
findChildren(self, types: Tuple, re: QRegularExpression, options: Qt.FindChildOption = Qt.FindChildrenRecursively) List[QObject]
inherits(self, classname: str) bool
installEventFilter(self, a0: QObject)
isSignalConnected(self, signal: QMetaMethod) bool
isWidgetType(self) bool
isWindowType(self) bool
killTimer(self, id: int)
metaObject(self) QMetaObject
moveToThread(self, thread: QThread)
objectName(self) str
objectNameChanged

objectNameChanged(self, objectName: str) [signal]

parent(self) QObject
property(self, name: str) Any
pyqtConfigure(...)

Each keyword argument is either the name of a Qt property or a Qt signal. For properties the property is set to the given value which should be of an appropriate type. For signals the signal is connected to the given value which should be a callable.

receivers(self, signal: PYQT_SIGNAL) int
removeEventFilter(self, a0: QObject)
sender(self) QObject
senderSignalIndex(self) int
setObjectName(self, name: str)
setParent(self, a0: QObject)
setProperty(self, name: str, value: Any) bool
signalsBlocked(self) bool
startTimer(self, interval: int, timerType: Qt.TimerType = Qt.CoarseTimer) int
staticMetaObject = <PyQt6.QtCore.QMetaObject object>
thread(self) QThread
timerEvent(self, a0: QTimerEvent)
tr(sourceText: str, disambiguation: typing.Optional[str] = None, n: int = - 1) str